Abstract:Abstract Pulsating flame jets have been widely used in open-top carbon anode baking furnaces for aluminum electrolysis. Reducing energy consumption and pollutant emissions are still major challenges in baking (heat-treatment) carbon anode blocks. It is also of immense significance to bake all the anodes uniformly irrespective of their position in the furnace. Baking homogeneity can be enhanced noticeably by optimizing anode baking operational, geometrical, and physical parameters. In the present study, CFD simulations are combined with a response surface methodology to investigate and optimize the effects of pulse pressure, pulse frequency, and mainstream inlet oxygen concentration and mainstream inlet temperature. Two-levels half fractional factorial design with a center point is employed. It is perceived that pulse combustion with short pulse time and high momentum results in significant enhancement of the anode baking furnace energy efficiency. The temperature homogeneity is also significantly improved. It is found that the oxygen concentration is statistically the most significant parameter on NOx and soot formations, followed by the fuel flow rate. For NOx formation, air inlet oxygen concentration has a strong interaction with pulse duration. Coupling CFD models with the response surface methodologies demonstrated great potential in multi-objective optimization of the anode baking process with enhanced energy efficiency and baking uniformity.

Decrease Anode Efficiency Factor to Achieve Energy Saving and Emission Reduction Targets

Technology Research on Decreasing the Aluminum Surface Waves and Reducing the Cathode Voltage Drop in Aluminum Electrolysis Cell

Reducing PFCs with Local Anode Effect Detection and Independently Controlled Feeders in Aluminum Reduction Cells

Lowering the anodic overvoltage by doping the carbon anodes in aluminum electrolysis

Development and application of integrated technology of current-intensifying and high-efficiency energy-saving for aluminium reduction

The fuzzy control of alumina concentration in aluminum reduction cells

Control of Temperature and Aluminum Fluoride Concentration Based on Model Prediction in Aluminum Electrolysis

Reduction of the Operating Temperature of Aluminum Electrolysis: Low Temperature Electrolyte

Industrial test of low-voltage energy-saving aluminum reduction technology

Industrial Experiments of Single Point Feeding Control Method in Large-scale Aluminum Reduction Cell

Prevention and Control Measures of the Cathode Voltage Drop Rise of Aluminum Electrolytic Cell Due to Unstable Power Supply Load

Pilot experiments of low temperature (700 ~ 800°C) aluminum electrolysis in A 5KA Caluminum reduction cell

A new process of alumina suspension electrolysis

Optimizing Pulse Combustion Parameters in Carbon Anode Baking Furnaces for Aluminum Production

Intelligent anode effect prediction method for prebaked-anode aluminum reduction cells

RESEARCH ON ALTERNATION REGULARITY OF ANODIC RESISTANCE IN PREBAKED ANODE ALUMINUM ELECTROLYSIS CELL

Influences of Gas Discharging Grooves at Bottom of Prebaked Carbon Anodes on Bath Flow Pattern in Aluminum Reduction Cells

Progress in Aluminum Electrolysis Control and Future Direction for Smart Aluminum Electrolysis Plant

A hydrogen evolution catalyst lowering energy consumption in aluminum anodization

A High-Performance Al-air Fuel Cell Using a Mesh-Encapsulated Anode Via Al–Zn Energy Transfer

Practices of reducing fluorides consumption during the aluminium reduction