Data Acquistion Device Based on USB Bus and Application

Wenquan Wang

2005-01-01

Abstract:The traditional data acquisition system based on board card has many disadvantages,for example,it is not easily toted and has bad compatibility of the hardware.In order to resolve the above disadvantages,we design and realize a data acquisition system based on USB Bus.This paper also introduces simply its applications.

What problem does this paper attempt to address?

Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
Data Acquisition System Based on USB Bus

宁蕴绯,张宇翔,郭敏

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.16.029

2008-01-01

Abstract:A design scheme of data acquisition based on USB Bus and it s hardware and software implementation are introduced. As a new computer bus interface criterion,USB applies to the high -speed data acquisition system.This article introduces the USB con-nection technology in the testsurvey,the success has developed a set of practical portable multi-purpose high speed data acquisition system. The paper introduces the design of data acquisition system based on USB interface,including hardware design,firmware design, driver design based on WDM and internet applications design.
The Design of a Data Acquisition System Based on USB

DAI Hai-feng,FU Cui-yu

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.04.012

2006-01-01

Abstract:This paper presents the design of a data acquisition system based on the USB interface,which has its rational hardware structure and corresponding software.This system has been put into operation,which has produced a wonderful effect.
Application of USB in the Data Acquisition System

杜德生,李树林

DOI: https://doi.org/10.3969/j.issn.1003-7241.2008.09.037

2008-01-01

Abstract:As the developing of computer and information techniques,the data acquisition system combined with advanced electronic techniques could process vast data by software.Universal Serial Bus(USB) which has been the PC-standard provided a lot of convenience for data collection.Using the USB can achieve more effective,more economic more points of data collection than traditional methods.This paper discusses the use of USB interface to achieve multipoint data acquisition.
Real-time Bidirectional Data Transmission Based on USB Interface

Kuang Wang

2005-01-01

Abstract:The article designs a real-time bidirectional transmission channel.And it introduces the theory of the design,selects specific chip,introduces the hardware of the channel,and brings forward the method of designing USB firmware,driver,and application.
Application of the Module USB 130 in Data Acquisition

Bin-qiang SI,Han-ling MAO,Zhen-feng HUANG

DOI: https://doi.org/10.3969/j.issn.1007-2373.2005.05.018

2005-01-01

Abstract:With high-speed transfers,hot-plugging,Plug and Play,and so on,USB Bus have had abroad application.However,the development tool and means are difficult and complicated,so popularization and application of the USB is influenced.A simpler method have been introduced for USB communication,which made the USB easy and swift to develop,andhavingcertain practicability,moreoverhavingreference fordesigning data acquisition system based on USB.
High-Speed Data Acquisition System Base On Usb

Y Wang,Zm Wu,Bf Zhao

2002-01-01

Abstract:The high-speed data acquisition system based on USB (Universal Serial Bus) includes a computer loaded testing platform software, A/D converter, micro-controller and communication interface of USB, and can rapidly and accurately transmit data collected. In circuit design except analogue circuit, memory and microprocessor, nearly all-logical circuit can be realized by PLD (Programmable Logic Device), which improve the system integration, and transform the design of hardware into design of software, and increase the speed of exploitation and reliability of system.
A data acquisition system based on usb2.0

Dai Guan-zhong

2005-01-01

Abstract:A data acquisition system based on USB2.0 is this paper, including the designing of hardware, firmware, drivers and application programs is presended. This system can realize analog signal sampling in 8 channels simultaneously and the input and output of switching signal in 16 binary channels. The USB interface control chip adopted is CY7C68013, a product of the Company of Cypress. Through designing the control logic of its GPIF interface, sampling and transmiting with high speed have been realized.
Design of data acquisition device driver based on USB bus

Zang Julun,Zhu Changqing,Wang chuanchuan,Jiang Shaofei

DOI: https://doi.org/10.3969/j.issn.1002-8978.2009.12.018

2009-01-01

Abstract:Combine to the data acquisition device based on USB bus,It introduced operational principle,design principle and design method of WDM driver.It also gave a driver routine for implementing USB bulk transfer,Introduced the routine's every functional module.It has stable function,reliable transmission.It has already been applied to data acquisition device.The testing results of the system function has been proved that the data transmission procedure coming to the design request.The detailed instruction for the design procedure of the driver program is useful for design of special USB device driver in practice.
Design of box of data acquisition with USB interface based on wireless transmission

Yu Dahua,Chen Aiguo

DOI: https://doi.org/10.3969/j.issn.1002-7300.2008.02.044

2008-01-01

Abstract:At present data acquisition system often transmits data via wire.It is difficult to achieve the integrity and all sidedness performance in the data acquisition and analyse in the field or separated workshops.And that will cause more cost and more manpower wastage.This paper provides a new way to solve the problem and designs a new intelligentized and widely applicable data acquisition system with USB interface based on wireless transmission.The data acquisition board connecting to the computer uses C8051F320 chip as the core chip.The final data acquisition system has the character of high precision measuring,low system power consumption,low cubage and high anti-jamming ability.It completes more economical,more efficient and more flexible data acquisition than in traditional ways,and it has the wide prospect of application.
Design of Data Acquisition System Based on WUSB

李亮,张维强,刘德营,乔鹏,孙成正

DOI: https://doi.org/10.3969/j.issn.1001-182X.2007.01.011

2007-01-01

Abstract:WirelessUSB LR system made by Cypress Corporation with a low-cost and the chip of CYWUSB6935 based on WirelessUSB LR technology are introduced in this paper.Combined the microcontroller of CY7C68013 which belongs to EZ-USB FX2 serial and TMS320LF2407 processor.a minimal system of wireless data acquisition and transportation are presented in the paper.At last.the development approach of application program in USB device is provided.
Data Acquisition System Based on USB2.0 and the Applications in the Fault Diagnosis

QIU Xuan-bing,XIONG Xiao-yan

DOI: https://doi.org/10.3969/j.issn.1672-6413.2006.01.023

2006-01-01

Abstract:This paper introduces data acquisition system based on USB2.0 and the application in the fault diagnosis and presents the system hardware composition principium and software designed method.With the help of CY7C68013,the system has the characteristic of convenience,and "plug and play",and so on.Because of introducing LabVIEW7.0 software,it enhances the flexibility and practicability of this system in the fault diagnosis.Connecting to notebook PC,it can make movable online fault diagnosis and analysis and process,so it has upper value of practicality and popularization.
A Data Collection System Based on USB Interface

XIONG Kaisheng,DONG Zhaoxin

DOI: https://doi.org/10.3969/j.issn.1674-4888.2006.10.026

2006-01-01

Abstract:With the popularization and development of USB(Universal Serial Bus) interface,how to make use of the USB interface to realize data collection now becomes a hotspot of research and development.Realization concept of data collection system based on USB and implementation with microprocessor with embedded USB interface are presented and the hardware design and software development are discussed.On the part of hardware design,this article provides three schemes and introduces one among this three schemes in detail.On the part of software development,this article introduces the USB firmware design,USB device drive program design and application program design in detail.
A High-speed Isolated Data Acquisition System

陈芳,王毅,鄢素云

DOI: https://doi.org/10.3969/j.issn.1004-373x.2003.15.024

2003-01-01

Abstract:This paper introduced actualities of data acquisition technology.According to the demand of high speed isolated da- ta acquisition system,the method of data acquiring,recording and transferring and the plan of the circuitwith EZ USB microcon- troller and CPL D are is elaborated.
Design of Four-Channel High Precision Data Acquisition System with USB Interface

XUE Feng,LI Bin

DOI: https://doi.org/10.3969/j.issn.1000-3630.2007.05.025

2007-01-01

Abstract:The design of data acquisition system with high speed and high precision,which is based on USB (Universal Serial Bus),is introduced in this paper. A new audio A/D chip AKM5394 is applied to the data acquisition system. Using CPLD,FIFO,USB interface chip and two AKM5394,a four channel data acquisition system with high precision is implemented. The data are also saved and displayed in real time by USB interface on computer. The driving program,which is used for Windows 2000 or Windows XP,and the application program of the system are realized in Visual C++ language,and the firmware codes are programmed in C language. Because of low cost and a high performance,the system with a measuring precision up to 22 bit can be widely used in such fields as measuring control,signal analysis,and so on.
A Data Acqusition System Based on DSP and USB

JIANG Chao,LI Pei-yu

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.01.057

2005-01-01

Abstract:The structure of a data acquisition system based on DSP and USB chips was described.The interface between different modules was introduced,and the design of firmware used in USB was described.
Design of the Data Collecting System Based on USB Bus

井科伟,罗耀华,张敬南

DOI: https://doi.org/10.3969/j.issn.1009-671x.2004.02.020

2004-01-01

Abstract:This paper introduced the characteristics of the bus interface of USB. And taking the data collecting system made up with USBN9604 of NS Company and ADuC812 of AD Company as example,it introduced the design process of USB device.
Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

WANG Ping,SU Tao,FANG Haojun

DOI: https://doi.org/10.3969/j.issn.1004-373x.2007.01.029

2007-01-01

Abstract:To collect data and send the processed data to the PC in high speed,we design a high speed real-time data acquisition system based on USB 2.0.The paper introduces the hardware design of the system,the emphasis introduces the design of the firmware,driver and application program of the ISP1581.The system could complete data acquisition,processing and transmission very well,which is proved on a high speed DSP platform.
Design on autos running parameter acquisition system based on USB host

Ming-zhu LIU,Li-ling HE,Li-wei GE

DOI: https://doi.org/10.3969/j.issn.1672-0946.2005.01.018

2005-01-01

Abstract:To realize the measure of automobile running parameters and the storage of mass acquired data, a new data acquisition system is designed by analyzing the protocol of Universal Serial Bus (USB) in this paper. It uses the embedded USB Host technology as the emphasis of the design, and uses USB movable disk as its memory device. This paper also gives the design principle, circuit structure, special data communication drivers and applied programs. This system implements the efficient data communication in the USB Host controller, the operations of data acquisition and the data transmission in high speed, and it can realize the function of data acquisition, memory, display and inquiry. The system can work efficiently under severe condition, and it also has excellent compatibility and expansibility because of the modularity design.
Linear CCD data acquisition system based on USB

Zhou Kun,Wang Qingyou,Luo Tao

DOI: https://doi.org/10.3969/j.issn.1002-7300.2006.03.036

2006-01-01

Abstract:Design and implementation of linear CCD data acquisition system, which is based on USB interface is introduced in this paper. The A/D transformation and two-valued data acquisition circuits of this system are designed with CPLD. The design of USB bus interface is realized with USB microcontroller CY7C68013. The experiment indicates that the system can meet the requirements of acquisition and fast processing of signals, and can be introduced to measurement system using linear CCD widely.

Data Acquistion Device Based on USB Bus and Application

Design of Data Communication Interface of Data Acquirement System Based on USB

Data Acquisition System Based on USB Bus

The Design of a Data Acquisition System Based on USB

Application of USB in the Data Acquisition System

Real-time Bidirectional Data Transmission Based on USB Interface

Application of the Module USB 130 in Data Acquisition

High-Speed Data Acquisition System Base On Usb

A data acquisition system based on usb2.0

Design of data acquisition device driver based on USB bus

Design of box of data acquisition with USB interface based on wireless transmission

Design of Data Acquisition System Based on WUSB

Data Acquisition System Based on USB2.0 and the Applications in the Fault Diagnosis

A Data Collection System Based on USB Interface

A High-speed Isolated Data Acquisition System

Design of Four-Channel High Precision Data Acquisition System with USB Interface

A Data Acqusition System Based on DSP and USB

Design of the Data Collecting System Based on USB Bus

Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

Design on autos running parameter acquisition system based on USB host

Linear CCD data acquisition system based on USB