A Data Acqusition System Based on DSP and USB

JIANG Chao,LI Pei-yu

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.01.057

2005-01-01

Abstract:The structure of a data acquisition system based on DSP and USB chips was described.The interface between different modules was introduced,and the design of firmware used in USB was described.

What problem does this paper attempt to address?

Design of Data Communication Interface of Data Acquirement System Based on USB

陈章位,赵玉刚

DOI: https://doi.org/10.3321/j.issn:1004-132X.2004.20.014

2004-01-01

Abstract:An interface based on USB is designed for Data Acquirement System with DSP chips. Cypress EZ-USB technology and FPGA technology were used in this interface. This kind of interface can achieve high speed data communication between the Data Acquirement System and the PC in the USB 1.1 protocol, and it can meet the requirements of high speed and real-time requirements.
The Design of a Data Acquisition System Based on USB

DAI Hai-feng,FU Cui-yu

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.04.012

2006-01-01

Abstract:This paper presents the design of a data acquisition system based on the USB interface,which has its rational hardware structure and corresponding software.This system has been put into operation,which has produced a wonderful effect.
Design of Four-Channel High Precision Data Acquisition System with USB Interface

XUE Feng,LI Bin

DOI: https://doi.org/10.3969/j.issn.1000-3630.2007.05.025

2007-01-01

Abstract:The design of data acquisition system with high speed and high precision,which is based on USB (Universal Serial Bus),is introduced in this paper. A new audio A/D chip AKM5394 is applied to the data acquisition system. Using CPLD,FIFO,USB interface chip and two AKM5394,a four channel data acquisition system with high precision is implemented. The data are also saved and displayed in real time by USB interface on computer. The driving program,which is used for Windows 2000 or Windows XP,and the application program of the system are realized in Visual C++ language,and the firmware codes are programmed in C language. Because of low cost and a high performance,the system with a measuring precision up to 22 bit can be widely used in such fields as measuring control,signal analysis,and so on.
Design and Application of Data Acquisition System Based on TMS320F2812 and USB

ZHANG Feng-jiang,WANG Xing-song

DOI: https://doi.org/10.3969/j.issn.1672-6413.2007.02.026

2007-01-01

Abstract:A multichannel data acquisition system was designed based on digital signal processor(DSP) and universal serial bus(USB) technology.The structure of the hardware and software was introduced,and the method of realization was described,the function was analysed.
The Design of DSP High Speed Data Acquisition System Based on USB2.0 Protocol

Yu-hui BI,Cheng-jun HUANG,Can-xin GUO,Yong QIAN

DOI: https://doi.org/10.3969/j.issn.1009-0665.2006.05.016

2006-01-01

Abstract:On the purpose of portable high speed data acquisition,a high speed data acquisition system based on USB2.0 protocol was developed.It used the TI's C6000 series DSPs as the core part and realized the high data transfer speed by the USB interface chip.Details about the HPI(host-port interface) of DSP,the GPIF(general programmable interface) and endpoints of USB chip,the firmware program of USB chip,the application program of PC host and so on were depicted.The acquisition system was applied to partial discharge on-line monitoring,and realized the detection and reconstruction of partial discharge signals.
Designation of USB2.0 interface in data acquisition system

Xing Wei,Liu Kaihua

DOI: https://doi.org/10.3969/j.issn.1002-7300.2006.01.007

2006-01-01

Abstract:The way of how to realize the interface of data acquisition system based on DSP and USB is introduced in this paper.The designation of hardware interface and the program structure of the firmware is given.
Development of Data Acquisition and Processing System Based on DSP and USB 2.0

YU Ping,QIN Shu-ren

DOI: https://doi.org/10.3969/j.issn.1000-582x.2005.05.001

2005-01-01

Abstract:The data acquisition and processing system are proceeding towards faster, more powerful, easier to use and more cost effectiveness. This paper discuss the design of the high speed and convenient data acquisition and processing system based on DSP and USB 2.0, and expatiates the principle and method of the virtual instruments system in detail. The system employs an ADS8346 to sample the six channel signals simultaneously with a resolution of 16-bit.It utilizes EZ-USB FX2 as the USB2.0 interface, which can achieve the high speed communication between the host and the system. It uses TMS320VC33 (dsp) as the core chip, which can accomplish the function of the main control and real-time digital signal processing. The system enhances the virtual instruments' advantage more by the combination between software and hardware.
A Real-Time Data Acquisition & Processing System Based on DSP with the USB Communication Interface

WANG Zong-bao,KONG Chun-lin,WANG Ke-yi,YAN Jun

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.04.015

2005-01-01

Abstract:The universal serial bus(USB) is provided with a high band-width,high speed and intelligent series ports,which has become the PC standard.The paper gives an introduction about a high-speed photo-elastic-modulated(PEM) polarization optical signal data acquisition processing system based on DSP with the USB communication interface,which can realize the real-time data processing function.
A data acquisition system based on usb2.0

Dai Guan-zhong

2005-01-01

Abstract:A data acquisition system based on USB2.0 is this paper, including the designing of hardware, firmware, drivers and application programs is presended. This system can realize analog signal sampling in 8 channels simultaneously and the input and output of switching signal in 16 binary channels. The USB interface control chip adopted is CY7C68013, a product of the Company of Cypress. Through designing the control logic of its GPIF interface, sampling and transmiting with high speed have been realized.
A High Speed Data Sampling System Based on DSP and USB

HUANG Hu,ZHOU Yun-shan,YI Wen-ying

DOI: https://doi.org/10.3969/j.issn.1001-2257.2006.06.011

2006-01-01

Abstract:In this paper,a data sample system based on DSP is briefly reviewed,this data collection system is main processor with DSP chip and USB interface is the communication interface with last personal computer.The characteristic of the system is stabilization and high speed.
Data communication based on USB interface of TMS320VC 5509 DSP

LENG Hua,LI Xin-ran,LI Zhi-jun,LI Cun-xiao

DOI: https://doi.org/10.3969/j.issn.1006-6047.2007.07.022

2007-01-01

Abstract:USB(Universal Serial Bus) is used in real-time mass data transfer between backstage PC and DSP-based data acquisition system.Using the internal USB module of TMS320VC 5509 DSP chip,the hardware interface circuit and control software are designed and the corresponding interface diagram and key codes are provided.The firmware of USB module is programmed with Visual C + +6.0 on Code Composer Studio and the Windows driver is developed with Driver Studio in backstage PC.The system designed is successfully used in substation for real-time data acquisition,meeting requirements of speed and real-time performance.
DSP Image Processing System Based on USB Communication

朱莉,苏剑波

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.15.070

2004-01-01

Abstract:The high-speed data transfer between DSP and PC is an essential problem in DSP application. The principle of the communication between PC and DSP through USB is analyzed in this article and the hardware structure is also introduced. An image processing system is designed based on USB.
Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

WANG Ping,SU Tao,FANG Haojun

DOI: https://doi.org/10.3969/j.issn.1004-373x.2007.01.029

2007-01-01

Abstract:To collect data and send the processed data to the PC in high speed,we design a high speed real-time data acquisition system based on USB 2.0.The paper introduces the hardware design of the system,the emphasis introduces the design of the firmware,driver and application program of the ISP1581.The system could complete data acquisition,processing and transmission very well,which is proved on a high speed DSP platform.
Design of a High Speed Data Acquisition System Based on DSP and MAX1420

宋宇飞,吴乐南,李小平

DOI: https://doi.org/10.3969/j.issn.1674-6236.2009.11.045

2009-01-01

Abstract:This paper introduces the status of the data acquisition system,analyses the function demands of the high speed data acquisition system,and accomplishes the corresponding design scheme.The hardware of the system frame and the circuits of the main module are given in detail.The structure of the system software and the flow-chart of the main program are explained.In this system,MAX1420 is used as the analog to digital converter,DSP(TMS320C6713)as the CPU,FT245BM to realize the USB2.0 interface function,and large-capacity memorizer to backup the sampling data.The system testing shows that the system can real time complete the data acquisition and storage.
Data Acquisition System Based on USB Bus

宁蕴绯,张宇翔,郭敏

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.16.029

2008-01-01

Abstract:A design scheme of data acquisition based on USB Bus and it s hardware and software implementation are introduced. As a new computer bus interface criterion,USB applies to the high -speed data acquisition system.This article introduces the USB con-nection technology in the testsurvey,the success has developed a set of practical portable multi-purpose high speed data acquisition system. The paper introduces the design of data acquisition system based on USB interface,including hardware design,firmware design, driver design based on WDM and internet applications design.
Design of USB Communication System Based on DSP

戴伟昊,杨建飞,刘建,邱鑫,郭爱琴

DOI: https://doi.org/10.3969/j.issn.1001-182X.2015.11.010

2015-01-01

Abstract:Universal serial bus (USB),simple in structure,easy to expand,suitable for wide-ranging data transmission,fast to process has been widely used.Based on Digital Signal Processor (DSP) chip TMS320F28335,the USB communication system module of hardware circuit and software program design is presented in this paper.
Study on AE data acquisition system based on DSP

Zhen-feng HUANG,Han-ling MAO

DOI: https://doi.org/10.3969/j.issn.1001-7445.2009.04.020

2009-01-01

Abstract:The design and application of a DSP(Digital Signal Processing) based Acoustic Emission(AE) data acquisition system hardware component and software processes were introduced.The data transmission of the system is completed form USB2.0 to computer,the transmittal mode was expanded.The functional modules of FIR(Finite Impulse Response) filtering,wavelet analyzing and feature extraction were embedded in DSP chip with the fast calculation.It was greatly reduced the amount of data transfer,features extraction was transmitted to upper computer only.The system is possibly applied to the situation of wireless transmission.The system is feasible by experiments.
Data Acquistion Device Based on USB Bus and Application

Wenquan Wang

2005-01-01

Abstract:The traditional data acquisition system based on board card has many disadvantages,for example,it is not easily toted and has bad compatibility of the hardware.In order to resolve the above disadvantages,we design and realize a data acquisition system based on USB Bus.This paper also introduces simply its applications.
Design and implementation of multi-channel speech acquisition system based on USB interfere

Lv Zhao,Wu Xiaopei,Li Mi

DOI: https://doi.org/10.19651/j.cnki.emt.2008.02.004

2008-01-01

Abstract:In order to get high quality multi-channel speech data,the USB based speech acquisition system with multi input is designed.The components and functions of hardware are analyzed,and the flow chart and some key program codes are given.This system has the advantages of fast data acquiring speed and hot-plugging.And it can be employed for real time data collection of multi-channel speech.
A Multi-Channel Data Acquisition System Based on DSP

Yuan Xiao

2009-01-01

Abstract:DSP is a kind of microprocessor applied in the processing of real-time digital signal. Compared with the system based on single chip microcomputer,the data acquisition system based on DSP could fairly satisfy the demands of accuracy and real time in data acquisition system. It solves the problem that the speed of data acquisition is too slow to acquire the multi-channel data simultaneously in the data acquisition system. This paper mainly describes the characteristics of CD4060 and TMS302LF2407A,and focuses on the system composition,software design and hardware design of the data acquisition system. This system,taking TMS302LF2407A as the control core,principally completes the fast and accurate acquisition of exterior multi-channel analog signals and realizes the data acquisition and transformation of multi-channel data.

A Data Acqusition System Based on DSP and USB

Design of Data Communication Interface of Data Acquirement System Based on USB

The Design of a Data Acquisition System Based on USB

Design of Four-Channel High Precision Data Acquisition System with USB Interface

Design and Application of Data Acquisition System Based on TMS320F2812 and USB

The Design of DSP High Speed Data Acquisition System Based on USB2.0 Protocol

Designation of USB2.0 interface in data acquisition system

Development of Data Acquisition and Processing System Based on DSP and USB 2.0

A Real-Time Data Acquisition & Processing System Based on DSP with the USB Communication Interface

A data acquisition system based on usb2.0

A High Speed Data Sampling System Based on DSP and USB

Data communication based on USB interface of TMS320VC 5509 DSP

DSP Image Processing System Based on USB Communication

Design of the High Speed Real-time Data Acquisition System Based on USB 2.0

Design of a High Speed Data Acquisition System Based on DSP and MAX1420

Data Acquisition System Based on USB Bus

Design of USB Communication System Based on DSP

Study on AE data acquisition system based on DSP

Data Acquistion Device Based on USB Bus and Application

Design and implementation of multi-channel speech acquisition system based on USB interfere

A Multi-Channel Data Acquisition System Based on DSP