The Effect of Porosity and Gradation on Shear Strength of Crushed Aggregate Based on DEM Approach

Pengcheng Wang,Jiankun Liu,Scott Schmidt

2016-01-01

Abstract:Crushed aggregate is widely used in geotechnical construction and its mechanical behavior has been investigated intensively, and porosity and gradation were proved to be very influential, considering the particle breakage and degradation of the crushed aggregate subjected to the coupled effect of load and weather. Based on discrete element methods, this study uses numerical models to simulate the triaxial shear condition of crushed aggregate by comparing experimental results of three different gradations including one well-graded and two uniformly- graded. The effect of porosity, gradation, and gravel content was also analyzed. To evaluate the porosity state of the crushed rock-gravel mixture, the concept of effective void ratio was proposed. The following main conclusions can be summarized: (1) the deviator shear stress-shear strain curves of almost all the aggregate were highly nonlinear, and the shear stress continued increasing with shear strain without a pronounced peak stress, (2) both the peak shear stress and the friction angle of the uniformly-graded aggregate increased initially with the void ratio followed by a decrease, and (3) the peak shear stress increases with effective diameter and mean diameter, but decreases with increasing effective void ratio and coefficient of uniformity.