Sum Frequency Generation for Surface Vibrational Spectroscopy

James B. Hunt,Philippe Guyot‐Sionnest,Y. R. Shen

1987-01-01

Abstract:Surface vibrational spectroscopy is one of the best means for characterizing molecular adsorbates.

What problem does this paper attempt to address?

Surface Vibrational Spectroscopy of Adsorbates on Metals, Semiconductors and Liquid/Solid Interfaces by Sum-Frequency Generation

R. Superfine,P. Guyot-Slonnest,James B. Hunt,C.-T. Kao,Y. R. Shen

1988-01-01

Abstract:Surface vibrational spectroscopy is of central importance for surface studies. Most of the existing spectroscopic techniques, unfortunately, have serious limitations. Recently, we have developed a new versatile surface spectroscopic tool, infrared-visible sum-frequency generation (SFG)1, that has a number of clear advantages over the existing techniques. Like optical second harmonic generation, SFG is highly surface-specific, and is applicable to all interfaces accessible by light. With the help of ultrashort pump pulses, it has the potential of being able to monitor in-situ surface dynamics, surface reactions, and intermediate transient species with picosecond time resolution.
Surface Vibrational Spectroscopy of Molecular Adsorbates on Metals and Semiconductors by Infrared-Visible Sum-Frequency Generation

R. Superfine,Philippe Guyot‐Sionnest,James B. Hunt,C.-T. Kao,Y. R. Shen

DOI: https://doi.org/10.1016/0039-6028(88)90422-0

IF: 1.9

1988-01-01

Surface Science

Abstract:We demonstrate the applicability of surface vibrational spectroscopy using infrared-visible sum-frequency generation to molecules adsorbed on metals and semiconductors. The spectra of CH stretches of octadecyltrichlorosilane on silicon and aluminum and ethylidyne on Rh(111) are presented as examples.
Coherent Vibrational Spectroscopy of Electrochemical Interfaces with Plasmonic Nano-gratings.

Zhihua Liu,Ying Li,Qian Xu,Hongqing Wang,Wei-Tao Liu

DOI: https://doi.org/10.1021/acs.jpclett.9b02985

2020-01-01

Abstract:The fundamental understanding of electrochemistry urges accurate knowledge of all interfacial properties at the molecular level, but the retrieval of such information is a real challenge. Optical spectroscopies facilitated by surface plasmon enhancement can shed light on this field, yet past studies relied on either highly inhomogeneous "hot spots" or planar plasmon modes with limited enhancement. Here we report an in situ sum-frequency vibrational spectroscopy scheme using plasmonic nanogratings, which enable strong, coherent surface plasmon excitation even on planar electrodes. With two classical reactions, the gold oxidation and pyridine adsorption in water, we demonstrate the realization of coherent vibrational spectroscopy in the strong absorption region, revealing the polar orientation and ordering of interfacial species that are crucial toward the mechanistic understanding of electrochemical phenomena.
Surface sum-frequency vibrational spectroscopy of nonpolar media

Shumei Sun,Chuanshan Tian,Y Ron Shen,Y. Ron Shen

DOI: https://doi.org/10.1073/pnas.1505438112

IF: 11.1

2015-04-27

Proceedings of the National Academy of Sciences

Abstract:Significance Sum-frequency vibrational spectroscopy (SFVS) has been developed into a viable surface analytical tool for media with inversion symmetry. It is considered surface specific because the bulk contribution to the signal vanishes under the electric-dipole approximation. However, there is always the worry that beyond the electric-dipole approximation, the bulk contribution may not be negligible. The problem is particularly acute if the medium under investigation does not have a strongly polar-oriented surface layer. We show here that for nonpolar media with well-separated infrared and Raman modes, it is possible to deduce bulk and surface spectra separately from combined transmission and reflection phase-sensitive SFVS measurements. The work also provides guidelines for evaluation of the importance of bulk contribution to SFVS in general.

multidisciplinary sciences
Doubly-resonant sum-frequency generation spectroscopy for surface studies

M.B. Raschke,M. Hayashi,S.H. Lin,Y.R. Shen

DOI: https://doi.org/10.1016/S0009-2614(02)00560-2

IF: 2.719

2002-01-01

Chemical Physics Letters

Abstract:Doubly-resonant infrared–visible sum-frequency generation (DR-SFG) as a two-dimensional surface spectroscopy was demonstrated experimentally for the first time. Probing electronic and vibrational transitions of a surface molecular monolayer simultaneously, the technique gives access to information about the electron-vibration coupling of the surface molecules. It allows selective studies of any interface accessible by light.
Exploring New Opportunities with Sum-Frequency Nonlinear Optical Spectroscopy

YR Shen

DOI: https://doi.org/10.1351/pac200173101589

2001-01-01

Pure and Applied Chemistry

Abstract:Over the last decade, infrared-visible sum-frequency generation has been developed into a powerful vibrational spectroscopic technique, especially for surface studies. We give here a brief review of the technique and a few recent applications of the technique to liquid and polymer surfaces. We also describe how the technique has found unique applications in our studies of surface melting of ice, ferroelectric ice films, and molecular chirality in chiral liquids. Doubly resonant sum-frequency generation as surface-specific two-dimensional spectroscopy is discussed.
Surface properties probed by second-harmonic and sum-frequency generation

Shen, Y. R.

DOI: https://doi.org/10.1038/337519a0

IF: 64.8

1989-01-01

Nature

Abstract:Optical second-harmonic generation and the related technique of infrared – visible light sum-frequency generation are extremely versatile tools for studies of many kinds of surfaces and interfaces. With the help of ultra-short laser pulses, they can be used to monitor surface dynamics and reactions with sub-picosecond time resolution.
Sum‐frequency Spectroscopy on Bulk and Surface Phonons of Noncentrosymmetric Crystals

Wei-Tao Liu,Y. R. Shen

DOI: https://doi.org/10.1002/andp.201000093

2010-01-01

Annalen der Physik

Abstract:Infrared-visible sum-frequency spectroscopy is shown to be an effective tool to probe not only bulk phonons, but also microscopic surface phonons of noncentrosymmetric crystals. Results on alpha-quartz are presented as an example. The observed surface phonons of the (0001) surface agree well with the calculated surface structure. (C) 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
&Lt;title>nonlinear Optical Spectroscopy for Surface Studies</title>

Yuen‐Ron Shen

DOI: https://doi.org/10.1117/12.180842

1994-01-01

Abstract:IR-visible sum-frequency generation as a versatile surface vibrational spectroscopic tool is described. Applications to neat water interfaces and hydrogen adsorption on diamond are used as illustrative examples.
Sum Frequency Generation Vibrational Spectroscopy (SFG-VS) for Complex Molecular Surfaces and Interfaces: Spectral Lineshape Measurement and Analysis Plus Some Controversial Issues

Hong-Fei Wang

DOI: https://doi.org/10.1016/j.progsurf.2016.10.001

IF: 7.111

2016-01-01

Progress in Surface Science

Abstract:Sum-frequency generation vibrational spectroscopy (SFG-VS) was first developed in the 1980s and it has been proven a uniquely sensitive and surface/interface selective spectroscopic probe for characterization of the structure, conformation and dynamics of molecular surfaces and interfaces. In recent years, there have been many progresses in the development of methodology and instrumentation in the SFG-VS toolbox that have significantly broadened the application to complex molecular surfaces and interfaces. In this review, after presenting a unified view on the theory and methodology focusing on the SFG-VS spectral lineshape, as well as the new opportunities in SFG-VS applications with such developments, some of the controversial issues that have been puzzling the community are discussed. The aim of this review is to present to the researchers and students interested in molecular surfaces and interfacial sciences up-to-date perspectives complementary to the existing textbooks and reviews on SFG-VS.
Vibrational sum frequency scattering in absorptive media: A theoretical case study of nano-objects water

Sergey Kulik,Saranya Pullanchery,Sylvie Roke

DOI: https://doi.org/10.48550/arXiv.2007.10845

2020-07-21

Abstract:The structures of interfaces of nano- and microscale objects in aqueous solution are important for a wide variety of physical, chemical and biological processes. Vibrational sum frequency scattering has emerged as a useful and unique probe of the interfacial structure of nano- and microscale objects in water. However, the full surface vibrational stretch mode spectrum has not been measured yet, even though it would be extremely informative to do so. The reason for this is that probing the vibrational modes of interfacial water requires a full understanding of how the linear absorptive properties of the bulk aqueous medium influence the sum frequency scattering process. Here, we have simulated vibrational sum frequency scattering spectra of the interface of nanoscale objects dispersed in water. We analyzed the effect of the infrared pulse absorption on the outcome of surface vibrational sum frequency scattering measurements. We find that both infrared absorption as well as the type of optical detection can drastically modify the measured vibrational interfacial spectrum. The observed changes comprise spectral distortion, frequency shifting of the main vibrational stretch mode and the introducing of a new high frequency peak. This last feature is enhanced by non-resonant interactions.

Chemical Physics,Soft Condensed Matter
Sum-frequency Vibrational Spectroscopy on Molecular Chirality

MA Belkin,TA Kulakov,KH Ernst,L Yan,YR Shen

DOI: https://doi.org/10.1109/nlo.2000.883562

2003-01-01

Abstract:Infrared-visible doubly resonant sum-frequency spectroscopy has been successfully used to obtain optically active vibrational spectra of a chiral molecular monolayer. This establishes the technique as a unique tool for in situ probing of vibrational chirality.
Quantitative sum-frequency generation vibrational spectroscopy of molecular surfaces and interfaces: lineshape, polarization, and orientation.

Hong-Fei Wang,Luis Velarde,Wei Gan,Li Fu

DOI: https://doi.org/10.1146/annurev-physchem-040214-121322

2014-01-01

Annual Review of Physical Chemistry

Abstract:Sum-frequency generation vibrational spectroscopy (SFG-VS) can provide detailed information and understanding of the molecular composition, interactions, and orientational and conformational structure of surfaces and interfaces through quantitative measurement and analysis. In this review, we present the current status of and discuss important recent developments in the measurement of intrinsic SFG spectral lineshapes and formulations for polarization measurements and orientational analysis of SFG-VS spectra. The focus of this review is to present a coherent description of SFG-VS and discuss the main concepts and issues that can help advance this technique as a quantitative analytical research tool for revealing the chemistry and physics of complex molecular surfaces and interfaces.
Wave Mixing Spectroscopy for Surface Studies

YR Shen

DOI: https://doi.org/10.1016/s0038-1098(96)00726-0

IF: 1.934

1997-01-01

Solid State Communications

Abstract:Optical second-harmonic generation and sum-frequency generation are intrinsically surface-specific. They can therefore be used as effective surface probes. We briefly review the wide range of applications found for these probes in recent years. Many of them have opened the door for exciting new research opportunities.
Surface Vibrational Spectroscopy Of Sulfuric Acid-Water Mixtures At The Liquid-Vapor Interface

C. Radüge,V. Pflumio,Y.R. Shen

DOI: https://doi.org/10.1016/S0009-2614(97)00631-3

IF: 2.719

1997-01-01

Chemical Physics Letters

Abstract:Infrared-visible sum-frequency generation has been used to obtain vibrational spectra of sulfuric acid-water mixtures at the liquid-vapor interface in the OH stretch region. The spectral peaks gradually disappear with increase of sulfuric acid concentration. the dangling OH mode first, followed by the bonded OM modes. Thp results can be understood if the Liquid surfaces are assumed to possess a more or less ordered hydrogen-bonding network, (C) 1997 Published by Elsevier Science B.V.
Second-harmonic and sum-frequency generation for surface studies

j h hunt,philippe guyotsionnest,y r shen

DOI: https://doi.org/10.1007/978-3-540-47973-4_73

1987-01-01

Abstract:Second harmonic generation (SHG) has now been well established as a versatile surface-sensitive probe [1]. It has been used to study electrochemical processes at electrode surfaces, molecular adsorption and desorption at metal and semiconductor surfaces, orientational phase transition of molecular monolayers on water, surface reconstruction and epitaxial growth, and so on. More recently, it has been employed as a tool to monitor monolayer polymerization and other surface reactions [2], to probe polar order of molecules at interfaces [3], and to measure molecular nonlinearity [4]. While most surface techniques are restricted to the solid/vacuum environment, SHG is applicable to nearly all interfaces as long as the interfaces are accessible by light. In addition, SHG has the advantages of being capable of in-situ measurements with high temporal, spatial, and spectral resolutions.
The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy

Ashley N Mapile,Michael A LeRoy,Kevin Fabrizio,Lawrence F Scatena,Carl K Brozek

DOI: https://doi.org/10.1021/acsnano.4c03758

IF: 17.1

2024-05-10

ACS Nano

Abstract:Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy...

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Liquid Interfaces: A Study by Sum-Frequency Vibrational Spectroscopy

P. B. Miranda,Y. R. Shen

DOI: https://doi.org/10.1021/jp9843757

IF: 3.466

1999-01-01

The Journal of Physical Chemistry B

Abstract:Liquid interfaces play a fundamental role in science and technology. The development of surface-sensitive probes capable of yielding molecular information about these interfaces is of great importance. This paper gives an overview of our and some others' recent work on vibrational spectroscopy of liquid interfaces by the sum-frequency generation (SFG) technique. This technique, being highly surface specific and applicable to all interfaces accessible by light, has been proven to be a most powerful analytical tool for liquid interfaces. A wide range of systems have been studied including neat liquid surfaces, solid/liquid and liquid/liquid interfaces, surfactants at liquid interfaces, and electrochemical interfaces. In many cases, SFG is shown to be the only technique available that can provide detailed information about a liquid interface at the molecular level.
Evaluation of Surface vs Bulk Contributions in Sum-Frequency Vibrational Spectroscopy Using Reflection and Transmission Geometries<sup>†</sup>

Xing Wei,Seok-Cheol Hong,A. I. Lvovsky,Hermann Held,Y. R. Shen

DOI: https://doi.org/10.1021/jp9933929

2000-01-01

Abstract:An experiment was designed to measure sum-frequency generation (SFG) spectra in both reflection and transmission. The result from an octadecyltrichlorosilane monolayer on a substrate reveals that while the resonant spectra in the two geometries both originate from the surface monolayer, the bulk substrate has a significant contribution to the nonresonant background in the transmitted spectra. Study of a polyethylene film also shows that the bulk contribution to the SFG spectra is only significant for the transmission geometry, exhibiting a resonant mode not observable in the reflected spectra.
Quantitatively Determining Surface-Adsorbate Properties from Vibrational Spectroscopy with Interpretable Machine Learning

Xijun Wang,Shuang Jiang,Wei Hu,Sheng Ye,Tairan Wang,Fan Wu,Li Yang,Xiyu Li,Guozhen Zhang,Xin Chen,Jun Jiang,Yi Luo

DOI: https://doi.org/10.1021/jacs.2c06288

IF: 15

2022-08-26

Journal of the American Chemical Society

Abstract:Learning microscopic properties of a material from its macroscopic measurables is a grand and challenging goal in physical science. Conventional wisdom is to first identify material structures exploiting characterization tools, such as spectroscopy, and then to infer properties of interest, often with assistance of theory and simulations. This indirect approach has limitations due to the accumulation of errors from retrieving structures from spectral signals and the lack of quantitative...

chemistry, multidisciplinary

Sum Frequency Generation for Surface Vibrational Spectroscopy

Surface Vibrational Spectroscopy of Adsorbates on Metals, Semiconductors and Liquid/Solid Interfaces by Sum-Frequency Generation

Surface Vibrational Spectroscopy of Molecular Adsorbates on Metals and Semiconductors by Infrared-Visible Sum-Frequency Generation

Coherent Vibrational Spectroscopy of Electrochemical Interfaces with Plasmonic Nano-gratings.

Surface sum-frequency vibrational spectroscopy of nonpolar media

Doubly-resonant sum-frequency generation spectroscopy for surface studies

Exploring New Opportunities with Sum-Frequency Nonlinear Optical Spectroscopy

Surface properties probed by second-harmonic and sum-frequency generation

Sum‐frequency Spectroscopy on Bulk and Surface Phonons of Noncentrosymmetric Crystals

&Lt;title&gt;nonlinear Optical Spectroscopy for Surface Studies&lt;/title&gt;

Sum Frequency Generation Vibrational Spectroscopy (SFG-VS) for Complex Molecular Surfaces and Interfaces: Spectral Lineshape Measurement and Analysis Plus Some Controversial Issues

Vibrational sum frequency scattering in absorptive media: A theoretical case study of nano-objects water

Sum-frequency Vibrational Spectroscopy on Molecular Chirality

Quantitative sum-frequency generation vibrational spectroscopy of molecular surfaces and interfaces: lineshape, polarization, and orientation.

Wave Mixing Spectroscopy for Surface Studies

Surface Vibrational Spectroscopy Of Sulfuric Acid-Water Mixtures At The Liquid-Vapor Interface

Second-harmonic and sum-frequency generation for surface studies

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy

Liquid Interfaces: A Study by Sum-Frequency Vibrational Spectroscopy

Evaluation of Surface vs Bulk Contributions in Sum-Frequency Vibrational Spectroscopy Using Reflection and Transmission Geometries<sup>†</sup>

Quantitatively Determining Surface-Adsorbate Properties from Vibrational Spectroscopy with Interpretable Machine Learning

&Lt;title>nonlinear Optical Spectroscopy for Surface Studies</title>