&Lt;title>nonlinear Optical Spectroscopy for Surface Studies</title>

Yuen‐Ron Shen

DOI: https://doi.org/10.1117/12.180842

1994-01-01

Abstract:IR-visible sum-frequency generation as a versatile surface vibrational spectroscopic tool is described. Applications to neat water interfaces and hydrogen adsorption on diamond are used as illustrative examples.

What problem does this paper attempt to address?

Exploring New Opportunities with Sum-Frequency Nonlinear Optical Spectroscopy

YR Shen

DOI: https://doi.org/10.1351/pac200173101589

2001-01-01

Pure and Applied Chemistry

Abstract:Over the last decade, infrared-visible sum-frequency generation has been developed into a powerful vibrational spectroscopic technique, especially for surface studies. We give here a brief review of the technique and a few recent applications of the technique to liquid and polymer surfaces. We also describe how the technique has found unique applications in our studies of surface melting of ice, ferroelectric ice films, and molecular chirality in chiral liquids. Doubly resonant sum-frequency generation as surface-specific two-dimensional spectroscopy is discussed.
Coherent Vibrational Spectroscopy of Electrochemical Interfaces with Plasmonic Nano-gratings.

Zhihua Liu,Ying Li,Qian Xu,Hongqing Wang,Wei-Tao Liu

DOI: https://doi.org/10.1021/acs.jpclett.9b02985

2020-01-01

Abstract:The fundamental understanding of electrochemistry urges accurate knowledge of all interfacial properties at the molecular level, but the retrieval of such information is a real challenge. Optical spectroscopies facilitated by surface plasmon enhancement can shed light on this field, yet past studies relied on either highly inhomogeneous "hot spots" or planar plasmon modes with limited enhancement. Here we report an in situ sum-frequency vibrational spectroscopy scheme using plasmonic nanogratings, which enable strong, coherent surface plasmon excitation even on planar electrodes. With two classical reactions, the gold oxidation and pyridine adsorption in water, we demonstrate the realization of coherent vibrational spectroscopy in the strong absorption region, revealing the polar orientation and ordering of interfacial species that are crucial toward the mechanistic understanding of electrochemical phenomena.
Narrowband Nonlinear Optical Spectroscopy with Spatially Chirped Broadband Pulses.

Hui Li,Yaying Zhao,Ying Li,Wei-Tao Liu

DOI: https://doi.org/10.1364/ol.410335

IF: 3.6

2020-01-01

Optics Letters

Abstract:Nonlinear optical vibrational spectroscopies are powerful experimental tools for inspecting material properties that are difficult to acquire otherwise. As ultrafast lasers used in such experiments are typically of much broader bandwidth than vibrational modes, narrowband filtering is usually essential, and the utility of laser energy is often highly inefficient. Here we introduce an experimental scheme to break this trade-off. A broadband beam is spatially chirped as it reaches the sample, and generates sum-frequency signals upon overlapping with another broadband, unchirped beam. A narrowband spectrum can then be retrieved from the spatially dispersed image of signals, with both broadband pulses fully utilized. The scheme is also readily employed as a spatially resolved spectroscopy technique without scanning, and can be easily extended to other wave-mixing experiments.
Surfaces Probed By Nonlinear Optics

Y.R Shen

DOI: https://doi.org/10.1016/0039-6028(94)90681-5

IF: 1.9

1994-01-01

Surface Science

Abstract:Optical second harmonic and sum-frequency generation has recently been proven to be a very versitile probe for surface and interface studies. Here a brief account is given on how the technique was developed and numerous applications found in our laboratory.
Surface Nonlinear Optics for Material Studies

Shen, Y.R.

DOI: https://doi.org/10.1109/nlo.1990.695938

1990-01-01

Abstract:Optical second harmonic generation (SHG) and infrared-visible sum-frequency generation (SFG) as surface probes have recently attracted a great deal of attention because of their seemingly unlimited possible applications to all areas of surface science. We review here the recent progress in this field. We first discuss how surface-specific these techniques really are. This is important because the bulk contribution to the signal sets a limit to the sensitivity of such surface probes. We then give a number of examples to illustrate the power of the techniques. Most of them are chosen to show that SHG and SFG are unique in providing specific information about the particular surface or interfacial systems. The following problems will be discussed in some detail. 1. Measurements of molecular nonlinearities and the environmental effect on soluble and insoluble molecular monolayers at air/water interfaces. 2. Studies of molecular orientations of liquid surfaces. 3. Creation and detection of monolayer gratings on crystalline surfaces and measurements of anisotropic surface diffusion. This work was supported by DOE under Contract No. DE-ACO3-76SF00098.
Nonlinear optical spectroscopy of solid interfaces

Markus B. Raschke,Y. Ron Shen

DOI: https://doi.org/10.1016/j.cossms.2005.01.002

IF: 12.857

2005-01-01

Current Opinion in Solid State and Materials Science

Abstract:Nonlinear optical spectroscopies for the investigation of solid surfaces and interfaces are reviewed. Emphasis is on the surface-specific second-order nonlinear optical response. Following a brief introduction on the fundamental, a broad variety of applications of second-harmonic (SHG) and sum-frequency (SFG) spectroscopic techniques are discussed. An outlook on exciting new opportunities provided by these techniques is presented.
Surface properties probed by second-harmonic and sum-frequency generation

Shen, Y. R.

DOI: https://doi.org/10.1038/337519a0

IF: 64.8

1989-01-01

Nature

Abstract:Optical second-harmonic generation and the related technique of infrared – visible light sum-frequency generation are extremely versatile tools for studies of many kinds of surfaces and interfaces. With the help of ultra-short laser pulses, they can be used to monitor surface dynamics and reactions with sub-picosecond time resolution.
Surface Vibrational Spectroscopy of Adsorbates on Metals, Semiconductors and Liquid/Solid Interfaces by Sum-Frequency Generation

R. Superfine,P. Guyot-Slonnest,James B. Hunt,C.-T. Kao,Y. R. Shen

1988-01-01

Abstract:Surface vibrational spectroscopy is of central importance for surface studies. Most of the existing spectroscopic techniques, unfortunately, have serious limitations. Recently, we have developed a new versatile surface spectroscopic tool, infrared-visible sum-frequency generation (SFG)1, that has a number of clear advantages over the existing techniques. Like optical second harmonic generation, SFG is highly surface-specific, and is applicable to all interfaces accessible by light. With the help of ultrashort pump pulses, it has the potential of being able to monitor in-situ surface dynamics, surface reactions, and intermediate transient species with picosecond time resolution.
Wave Mixing Spectroscopy for Surface Studies

YR Shen

DOI: https://doi.org/10.1016/s0038-1098(96)00726-0

IF: 1.934

1997-01-01

Solid State Communications

Abstract:Optical second-harmonic generation and sum-frequency generation are intrinsically surface-specific. They can therefore be used as effective surface probes. We briefly review the wide range of applications found for these probes in recent years. Many of them have opened the door for exciting new research opportunities.
Optical Second Harmonic Generation for Surface Studies

Y. R. Shen

DOI: https://doi.org/10.1007/978-3-642-82493-7_14

1985-01-01

Abstract:The progress of surface science relies heavily on our ability to probe surfaces and interfaces. For this purpose, many techniques have been developed in the past [13.11. Recently, laser methods for material studies have advanced to a highly sophisticated level; one therefore wonders if they can also be applied to surface studies. Indeed, there have been a number of very interesting recent discoveries in this area. It is found that laser-induced fluorescence or resonant ionization can be used to probe angular, velocity, and internal energy distributions of molecules scattered or desorbed from a surface [13.21. Coherent Raman spectroscopy [13.3], laser-induced desorption [13.4], photoacoustic spectroscopy [13, 5], and photothermal deflection spectroscopy [13.6] can be used to study surface states and molecular vibrations of adsorbates. Lately, we have shown that surface second harmonic generation (SHG) is also an effective tool for surface studies [13.7]. We describe here some of our recent work on this topic.
Surface Second Harmonic Generation: A New Technique for Surface Studies

YR SHEN

DOI: https://doi.org/10.1146/annurev.ms.16.080186.000441

1986-01-01

Annual Review of Materials Science

Abstract:Surface probing and characterization play an essential role in the progress of surface science and technology (1) . For this purpose, a large number of experimental methods have been developed, but they are often limited in their applicabilities. New surface probes are always in great demand. Among the existing techniques (1) , many involve emission, adsorption, or scattering of massive particles; only a few rely on optical probing. The optical methods have, in general, the advantages of being nondestructive, capable of in-situ remote sensing with high spatial and tc mporal resolution, and applicable to any interface accessible by light. The difficulty of these methods oft en lies in the lack of surface specificity and sensitivity. Linear optical absorption and reflection, for example, can be employed for sur face studies only if the dominant bulk contribution to the signal can be discriminated against (2) . The same is true with light scattering. Recent advances in lasers and optical detection systems have led to the invention of several novel surface tools. Laser-induced desorption (3) , photo acoust ic spectroscopy (4) , and photothermal deflection spectroscopy (5) have been developed for spectroscopic studies of adsorbates and sur face states. Resonance fluorescence (6) and multiphoton ionization (7) have been used to measure energy redistribution in molecules scattered or desorbed from a surface. V arious surface nonlinear optical effects have also been seriously considered for surface studies. Stimulated Raman gain
Surface-Enhanced Nonlinear Optical Effects and Detection of Absorbed Molecular Monolayers

Y. R. Shen,C. K. Chen,T. F. Heinz,D. Ricard

DOI: https://doi.org/10.1007/978-3-540-38804-3_71

1981-01-01

Abstract:In recent years, we have been interested in the study of nonlinear optical effects at interfaces. Our motivation is twofold. First, while nonlinear optics in a bulk medium is now well developed, that at an interface has not received much attention since the early investigations of BLOEMBERGEN and co-workers on second-harmonic reflection from a surface [1]. Second, with the understanding of surface nonlinear optics, we hope to use it for the study of surface properties, in particular, for the study of molecular adsorption and overlayers on surfaces. There already exist various techniques for studies of this nature, such as photoemission, LEED, Auger, infrared, and Raman spectroscopy [2], but laser optical techniques are intrinsically better in spectral resolution.
Surface nonlinear optics: a historical perspective

Y. R. Shen

DOI: https://doi.org/10.1109/2944.902191

IF: 4.9

2000-01-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:A historical review is given on the development of surface second-harmonic and sum-frequency generation and their applications as analytical tools to surface science.
Interface Studies with Nonlinear Optics

Rasing Th.,Shen Y. R.

DOI: https://doi.org/10.1557/s0883769400065234

IF: 5

1988-01-01

MRS Bulletin

Abstract:The importance of interfaces for material science and electronic devices has stimulated great interest in the development of surface analytical tools. Among them, modern optical techniques using lasers have attracted the most attention in recent years. They have the advantage of being applicable to all interfaces accessible by light, and the high temporal, spatial, and spectral resolutions offer unique opportunities for studying ultrafast molecular dynamics and other transient phenomena at interfaces. Optical second harmonic generation (SHG) and sum-frequency generation (SFG) are particularly being noticed because of the many recent successful demonstrations of their versatility. This article briefly introduces these newly developed surface probes, first outlining the basic principles behind surface SHG and SFG, and then illustrating the power of the techniques with selected examples. A more complete treatment of the theory can be found in References 4–6. An overview of the earlier applications can be found in Reference 3.SHG arises from the nonlinear polarization P(2)(2ω) induced in a medium by an incident laser field E(ω). In the electric dipole approximation, P is given by:where is a second-order nonlinear susceptibility. For a medium with inversion symmetry, it follows directly from Eq. 1 that = 0. However, at an interface the surface nonlinear susceptibility is nonvanishing because there the inversion symmetry is necessarily broken.
Nonlinear optical probes of interfaces

tony f heinz,h w k tom,y r shen

1983-01-01

Abstract:The laser has become an indispensable tool for investigating the bulk properties of matter, but it has not been widely exploited in the study of surfaces and interfaces. During the last few years, however, several promising applications of lasers to surface science have appeared. One line of research takes advantage of the laser's ability to probe surfaces and interfaces. Lasers can, for example, be used to obtain information about the molecule/surface interaction by detecting transitions in molecules scattered from surfaces. Laser-induced desorption and surface photoacoustic spectroscopy can yield vibrational spectra of molecules adsorbed on surfaces. Considerable progress has also been made in the development of surface probes based on nonlinear optical effects. These purely optical methods have an important role to play in surface studies. Unlike the conventional probes of surface science, which rely on the emission, absorption, or scattering of massive particles, they are generally applicable to interfaces between two dense media and, therefore, offer some unique and intriguing possibilities. In this article, a brief discussion of these techniques is given.
Integration of Conventional Surface Science Techniques with Surface-Sensitive Azimuthal and Polarization Dependent Femtosecond-Resolved Sum Frequency Generation Spectroscopy

Zhipeng Huang,Tobias Roos,Yujin Tong,R. Kramer Campen

2024-02-26

Abstract:Experimental insight into the elementary processes underlying charge transfer across interfaces has blossomed with the wide-spread availability of ultra-high vacuum set-ups that allow the preparation and characterization of solid surfaces with well-defined molecular adsorbates over a wide ranges of temperatures. Thick layers of molecular adsorbates or heterostructures of 2D materials generally preclude the use of electrons or atoms as probes in such characterization. However with linear photon-in/photon-out techniques it is often challenging to assign the observed optical response to a particular portion of the interface. We and prior workers have demonstrated in work under ambient conditions that by full characterization of the symmetry of the second order nonlinear optical susceptibility, i.e. the $\chi^{(2)}$, in sum frequency generation (SFG) spectroscopy, this problem can be overcome. Here we describe an ultra-high vacuum system built to allow conventional UHV sample preparation and characterization, femtosecond and polarization resolved SFG spectroscopy, the azimuthal sample rotation necessary to fully describe $\chi^{(2)}$ symmetry and with sufficient stability to allow scanning SFG microscopy. We demonstrate these capabilities in proof-of-principle measurements on CO adsorbed on Pt(111) and of the clean Ag(111) surface. Because this set-up allows both full characterization of the nonlinear susceptibility and the temperature control and sample preparation/characterization of conventional UHV set-ups we expect it to be of great utility in investigation of both the basic physics and applications of solid, 2D material heterostructures.

Chemical Physics,Materials Science
Surface Vibrational Spectroscopy of Molecular Adsorbates on Metals and Semiconductors by Infrared-Visible Sum-Frequency Generation

R. Superfine,Philippe Guyot‐Sionnest,James B. Hunt,C.-T. Kao,Y. R. Shen

DOI: https://doi.org/10.1016/0039-6028(88)90422-0

IF: 1.9

1988-01-01

Surface Science

Abstract:We demonstrate the applicability of surface vibrational spectroscopy using infrared-visible sum-frequency generation to molecules adsorbed on metals and semiconductors. The spectra of CH stretches of octadecyltrichlorosilane on silicon and aluminum and ethylidyne on Rh(111) are presented as examples.
Vibrational Spectroscopy of Molecules at Liquid/Liquid Interfaces.

G. Richmond

1997-05-30

Abstract:Abstract : Measurement of the nonlinear vibrational spectrum of molecules at a liquid/liquid interface has recently been achieved by the use of total internal reflection sum frequency vibrational spectroscopy (TIR SFVS). This report describes this nonlinear optical technique and gives examples of the type of information which has been obtained about interfacial water and surfactants adsorbed at this interface. The surfactants examined include simple alkyl cationic and anionic surfactants commonly used in cleaning products, and phosphatidylcholines which comprise the major component of cell membranes. Studies of interfacial water involve comparative studies at air/water and oil/water interfaces, and the effect of adsorbed surfactant on the water structure and orientation at these two interfaces.

Chemistry
Nonlinear Vibrational Spectroscopy for Probing Biological Interfaces

Xiaolin Lu

DOI: https://doi.org/10.1364/pibm.2017.t2c.1

2017-01-01

Abstract:Background of a nonlinear optical technique – sum frequency generation (SFG) spectroscopy was introduced first. Examples were then presented to demonstrate study of biological interfaces using SFG.
Spectral-Analysis of Surfaces at Subwavelength Resolution

R KOPELMAN,S SMITH,WH TAN,R ZENOBI,K LIEBERMAN,A LEWIS

DOI: https://doi.org/10.1117/12.59322

1992-01-01

Abstract:polymeric surfaces, Langmuir-Blodget films and biological samples can be investigated in-situ, in air orwater, and without radiation or otherwise induced damage. Luminescent or Raman active surface sites ormolecules can be detected, in principle, with atomic or molecular resolution and, furthermore, characterizedvia single site luminescence or Raman spectra. The goal of this research is a fluorescence nanoscope thatwill have the capability to zoom-in non-destructively, in water, air or vacuum, from the limits of resolution of

&Lt;title&gt;nonlinear Optical Spectroscopy for Surface Studies&lt;/title&gt;

Exploring New Opportunities with Sum-Frequency Nonlinear Optical Spectroscopy

Coherent Vibrational Spectroscopy of Electrochemical Interfaces with Plasmonic Nano-gratings.

Narrowband Nonlinear Optical Spectroscopy with Spatially Chirped Broadband Pulses.

Surfaces Probed By Nonlinear Optics

Surface Nonlinear Optics for Material Studies

Nonlinear optical spectroscopy of solid interfaces

Surface properties probed by second-harmonic and sum-frequency generation

Surface Vibrational Spectroscopy of Adsorbates on Metals, Semiconductors and Liquid/Solid Interfaces by Sum-Frequency Generation

Wave Mixing Spectroscopy for Surface Studies

Optical Second Harmonic Generation for Surface Studies

Surface Second Harmonic Generation: A New Technique for Surface Studies

Surface-Enhanced Nonlinear Optical Effects and Detection of Absorbed Molecular Monolayers

Surface nonlinear optics: a historical perspective

Interface Studies with Nonlinear Optics

Nonlinear optical probes of interfaces

Integration of Conventional Surface Science Techniques with Surface-Sensitive Azimuthal and Polarization Dependent Femtosecond-Resolved Sum Frequency Generation Spectroscopy

Surface Vibrational Spectroscopy of Molecular Adsorbates on Metals and Semiconductors by Infrared-Visible Sum-Frequency Generation

Vibrational Spectroscopy of Molecules at Liquid/Liquid Interfaces.

Nonlinear Vibrational Spectroscopy for Probing Biological Interfaces

Spectral-Analysis of Surfaces at Subwavelength Resolution

&Lt;title>nonlinear Optical Spectroscopy for Surface Studies</title>