Abstract:Constructing an interlinked three-dimensional conductive carbon structure as a sulfur host is considered to be an effective strategy for suppressing the capacity decay over long-term cycling and improving the rate performance of lithium-sulfur (Li-S) batteries, because it can not only facilitate rapid electronic and ionic transportation in the cathode, but also be conducive to confine lithium polysulfide (LiPS) dissolution and shuttling. In this report, we designed a novel 3D conductive network structure (CNTs/Co-NC), which is composed of Co-NC (cobalt embedded in an N-doped porous carbon composite) derived from ZIF-67 polyhedra and inserted carbon nanotubes (CNTs), and applied it as a sulfur host for Li-S batteries. The CNT/Co-NC network structure is firstly prepared via the in situ nucleation of small ZIF-67 crystals on the surface of CNTs and eventually grown into CNT/ZIF-67 hybrid materials; after subsequent carbonization and infiltration of sulfur procedures, the S@CNT/Co-NC cathode is obtained. Li-S batteries based on the S@CNT/Co-NC cathode show an improved rate capability of 772.6 mA h g-1 at the 2 C rate, enhanced long cycling stability under a large current density with a low capacity decay rate of ∼0.067% per cycle at the 0.5 C rate after 500 cycles and ∼0.072% per cycle at the 1 C rate after 700 cycles and an excellent coulombic efficiency of about 95% up to 500 cycles at 0.5 C and 91% up to 700 cycles at 1 C. The superior performance of S@CNTs/Co-NC should be ascribed to the rapid charge transfer, excellent electron conductivity, improved adsorption capability for LiPSs and enhanced redox kinetics of this 3D conductive network structure.

Batteries: Strongly Coupled Interfaces Between a Heterogeneous Carbon Host and a Sulfur-Containing Guest for Highly Stable Lithium-Sulfur Batteries: Mechanistic Insight into Capacity Degradation (adv. Mater. Interfaces 7/2014)

Batteries: Strongly Coupled Interfaces between a Heterogeneous Carbon Host and a Sulfur‐Containing Guest for Highly Stable Lithium‐Sulfur Batteries: Mechanistic Insight into Capacity Degradation (Adv. Mater. Interfaces 7/2014)

Strongly Coupled Interfaces between a Heterogeneous Carbon Host and a Sulfur‐Containing Guest for Highly Stable Lithium‐Sulfur Batteries: Mechanistic Insight into Capacity Degradation

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Synergistic Defect Engineering and Interface Stability of Activated Carbon Nanotubes Enabling Ultralong Lifespan All-Solid-State Lithium-Sulfur Batteries

Densely Integrated Co, N-Codoped Graphene@Carbon Nanotube Porous Hybrids for High-Performance Lithium-Sulfur Batteries

A Porous N-doped Carbon Aggregate As Sulfur Host for Lithium-Sulfur Batteries

Facilitation of sulfur evolution reaction by pyridinic nitrogen doped carbon nanoflakes for highly-stable lithium-sulfur batteries

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Construction of all-carbon micro/nanoscale interconnected sulfur host for high-rate and ultra-stable lithium-sulfur batteries: Role of oxygen-containing functional groups

Fully Integrated Hierarchical Double-Shelled Co9S8@CNT Nanostructures with Unprecedented Performance for Li-S Batteries

Nitrogen-Doped Hollow Carbon Polyhedrons With Carbon Nanotubes Surface Layers As Effective Sulfur Hosts For High-Rate, Long-Lifespan Lithium-Sulfur Batteries

Strong Sulfur Binding with Conducting Magnéli-phase Ti(n)O2(n-1) Nanomaterials for Improving Lithium-Sulfur Batteries.

Engineering Oversaturated Fe-N5 Multifunctional Catalytic Sites for Durable Lithium-Sulfur Batteries

Lithium Batteries: Highly Nitridated Graphene–Li2S Cathodes with Stable Modulated Cycles (Adv. Energy Mater. 23/2015)

Sub-nanometer cobalt clusters embedded carbon networks to promote the kinetics of polysulfide conversion

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen‐Doped Carbon Composites for High‐Performance Lithium–Sulfur Battery Cathodes

A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries

Building a robust sulfur host for aqueous Cu-S battery by introducing nitrogen into carbon nanotubes

Carbon@titanium Nitride Dual Shell Nanospheres As Multi-Functional Hosts for Lithium Sulfur Batteries

Carbon Nanotubes-Intercalated Co-N-C As a Robust Sulfur Host for Lithium-Sulfur Batteries