Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

Strongly Coupled Interfaces between a Heterogeneous Carbon Host and a Sulfur‐Containing Guest for Highly Stable Lithium‐Sulfur Batteries: Mechanistic Insight into Capacity Degradation

Batteries: Strongly Coupled Interfaces between a Heterogeneous Carbon Host and a Sulfur‐Containing Guest for Highly Stable Lithium‐Sulfur Batteries: Mechanistic Insight into Capacity Degradation (Adv. Mater. Interfaces 7/2014)

Batteries: Strongly Coupled Interfaces Between a Heterogeneous Carbon Host and a Sulfur-Containing Guest for Highly Stable Lithium-Sulfur Batteries: Mechanistic Insight into Capacity Degradation (adv. Mater. Interfaces 7/2014)

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Hierarchically porous, ultrathin N–doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium–sulfur batteries

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Controllable assembly of polysulfides mediator induced by host-guest chemistry for upgrading energy density and longevity of lithium-sulfur batteries

Polar and Conductive Iron Carbide@n-Doped Porous Carbon Nanosheets As a Sulfur Host for High Performance Lithium Sulfur Batteries

Multi-functional CoS2-N-C Porous Carbon Composite Derived from Metal-Organic Frameworks for High Performance Lithium-Sulfur Batteries

Construction of all-carbon micro/nanoscale interconnected sulfur host for high-rate and ultra-stable lithium-sulfur batteries: Role of oxygen-containing functional groups

A hollow Co0.12Ni1.88S2/NiO heterostructure that synergistically facilitates lithium polysulfide adsorption and conversion for lithium-sulfur batteries

Catalytic Interfaces‐Enriched Hybrid Hollow Spheres Sulfur Host for Advanced Li–S Batteries

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Vapor deposition of aluminium oxide into N-rich mesoporous carbon framework as a reversible sulfur host for lithium-sulfur battery cathode

Polarity-induced precipitation of S/Li2S confined into N and S co-doped porous graphene layered matrix for lithium sulfur batteries

A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries

Surface-Chemistry-Initiated Design of Host Materials for Sulfur Cathodes: from Nitrogen-Doped Carbon to Sulfiphilic Cobalt Disulfide

TiC nanoparticles supported on free-standing carbon nanofibers enabled high-performance Lithium–Sulfur batteries

Three-Dimensional Functionalized Carbon Nanotubes/Graphitic Carbon Nitride Hybrid Composite as the Sulfur Host for High-Performance Lithium–Sulfur Batteries

Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading