Abstract:Rod position measurement sensor is the key equipment of control rod hydraulic drive line, the measurement accuracy of the sensor is directly related to the safety and reliability of the reactor. Capacitance rod position measurement sensor is generally composed of excitation and detection electrodes, ceramic tube, outer shielding layer and measuring rod. For the double helix capacitance rod position measurement sensor with non-metallic measuring rod, the static characteristic experiment of the sensor was completed, the finite element method was used to establish the calculation model and the model was verified by the experimental results. By the calculation model, the influence of electrode angle, pitch, thickness and relative permittivity of ceramic tube on the eccentricity error of the sensor was systematically analyzed, the optimal combination of design parameters were obtained by orthogonal test method. The results show that the calculation results are in good agreement with the experimental results, the eccentricity error can be reduced by reducing the electrode angle, increasing the electrode pitch, increasing the thickness and reducing the relative permittivity of the ceramic tube. The design scheme of the sensor obtained by the orthogonal test can greatly reduce the eccentricity error and realize the requirement of rod position measurement without losing step. The research results provide guidance for the design and optimization of capacitance rod position measurement sensor.

ANALYSIS ON FRINGE EFFECT OF GROUNDING TYPE CAPACITANCE ROD POSITION SENSOR

FRINGE EFFECT CAPACITANCE SENSOR FOR CONTROL ROD POSITION MEASUREMENT

Impact of Fringe Effect on Measuring Accuracy of Planar Capacitive Sensors

Research on Static Characteristics of High Precision Capacitance Rod Position Measurement Sensor

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

Research on Static Characteristics of Capacitance Rod Position Measurement Sensor with Protection Electrodes

Research on Multi-Electrode Capacitance Rod Position Measurement Sensor for NHR-200

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

Static Calibration Experiments of Capacitance Control Rod Position Measurement Sensor

GROUNDED CONTROL ROD POSITION MEASUREMENT WITH TWO-ELECTRODE CAPACITANCE SENSOR

Analysis on the Influence of Protection Electrodes on the Capacitance Control Rod Position Sensor

Study on Static Characteristics of Array Electrode Capacitance Control Rod Position Measurement Sensor

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

Research on the Capacitance Control Rod Position Measurement Sensor in NHR-200

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Research on Eccentricity Performance of Capacitance Rod Position Measurement Sensor for Measuring Non-Metallic Rod

Investigation of the Effects of Electrode Geometry on the Performance of C4D Sensor with Radial Configuration.

Control Rod Position Measurement by Two-Electrode Capacitance Sensor in Nuclear Heating Reactor

Built-in Capacitance Sensor for Control Rod Position Measurement in NHR-200 with PEEK Material

Static performance of capacitance control rod position sensor: A review

Mechanism Model for Effect of Eccentricity on Capacitive Control Rod Position Indicators