Abstract:Cascading fault is a newly emerging challenge in hybrid ac/dc grids including current source converters (CSCs) which commences from a dc or a long-lasting severe inverter ac fault and ultimately provokes a total blackout at the inverter ac side. Nevertheless, since the cascading faults emanating from dc faults are not accompanied by commutation failure, the prevailing commutation failure elimination strategies are unable to inhibit these contingencies. To obviate such a challenge, this paper proposes a coordinated power flow control strategy which can preclude the blackouts caused by cascading faults initiated from either dc or inverter ac faults, thereby improving the reliability of hybrid ac/dc power grids. To achieve this, a back-to-back voltage source converter (B2B-VSC) is employed which is responsible for controlling both the inverter ac bus voltage and the active power flow of its connected ac line. This would not only mitigate the probability of commutation failure due to the reinforced inverter ac bus voltage, but also enhance the power flow flexibility of the power grid during both normal and fault conditions. In addition, the cost associated with implementation of the proposed strategy is much less than installing several backup parallel lines which are useless under no-fault circumstances. Finally, the practical viability of the proposed strategy is scrutinized through laboratory testing using co-simulation of RTDS and Opal-RT simulators. The obtained results show that the developed strategy can effectively manage the power flow of B2B-VSC and CSC-HVDC systems during different possible fault cases so that the power outage at the inverter ac side is minimized.

Fault Protection of Series Active Power Compensation Scheme

Survey on Fault-Tolerant Techniques for Power Electronic Converters

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

A novel fault-tolerant Shunt Active Power Filter and its control strategy

A Multi-Modular Shunt Active Power Filter System and Its Novel Fault-Tolerant Strategy Based on Split-Phase Control and Real-Time Bus Communication.

Regional Area Protection Scheme for Modern Distribution System

Fault analysis for DC Bus-integrated energy storage system, electric vehicle supply equipment, and photo voltaic systems

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Fault Reconfiguration of Super Uninterruptible Power Supply

An AC Fault-Ride-through Strategy for MMC Intergrated with Energy Dissipating Resistors in Offshore Wind Power System

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

A DC Solid-State Transformer with DC Fault Ride-Through Capability

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

A Decentralized Resilient Control Scheme for DC Microgrids Against Faults on Sensor and Actuator

Performance Analysis of a Reconfigurable Fault‐Tolerant Converter for Renewable Energy–Based Standalone System

Multiple-Fault-Tolerant Dual Active Bridge Converter for DC Distribution System

An Adaptive DC-Bus Stabilizer for Single-Phase Grid-Connected Renewable Energy Source System

Adaptive Distance Protection Based on the Analytical Model of Additional Impedance for Inverter-Interfaced Renewable Power Plants During Asymmetrical Faults

A Coordinated Power Flow Control Strategy to Enhance the Reliability of Hybrid Ac/dc Power Grids During Cascading Faults

Fault Characteristics and Riding-Through Methods of Dual Active Bridge Converter Under Short-Circuit of the Load

A Fault-Tolerant Control Strategy for the Delta-Connected Cascaded Converter