Abstract:This paper presents a 14-bit hybrid column-parallel compact analog-to-digital converter (ADC) for the application of digital infrared focal plane arrays (IRFPAs) with compromised power and speed performance. The proposed hybrid ADC works in two phases: in the first phase, a 7-bit successive approximation register (SAR) ADC performs coarse quantization; in the second phase, a 7-bit single-slope (SS) ADC performs fine quantization to complete the residue voltage conversion. In this work, the number of unit capacitors is reduced to 1/128th of that of a conventional 14-bit SAR ADC, which is beneficial for the application of small pixel-pitch IRFPAs. In this work, a tradeoff segmented thermometer-coded digital-to-analog converter (DAC) is adopted in the first 7-bit coarse quantization process: the lower 3-bit is binary coded, and the upper 4-bit is thermometer coded. A thermometer-coded DAC can improve the linearity of ADC. Capacitor array matching can be incredibly relaxed compared with a binary-weight 14-bit SAR ADC, resulting in a noncalibration feature. Moreover, by sharing DAC and comparator analog circuits between the SAR ADC and the SS ADC, the power consumption and layout area are consequently reduced. The proposed hybrid ADC was fabricated using a 180 nm CMOS process. The measurement results show that the proposed ADC has a differential nonlinearity of −0.61/+0.84 LSB and a sampling rate of 120 kS/s. The developed ADC achieves a temporal noise of 1.7 LSBrms at a temperature of 77 K. In addition, the SNDR is 72.9 dB, and the ENOB is 11.82 bit, respectively. Total power consumption is 71 μW from supply voltages of 3.3 V (analog) and 1.8 V (digital).

High Frame Rate High Precision ROIC with Pixel-level CCO-Based ADC for Infrared FPAs.

A 16-Bit Two-Stage ADC for 320×256 Infrared Focal Plane Array

A LOW POWER HIGH RESOLUTION ROIC DESIGN WITH 14-BIT COLUMN-LEVEL ADC FOR 384 × 288 IRFPA

The Design of a Low-Noise, High-Speed Readout-Integrated Circuit for Infrared Focal Plane Arrays

Two‐stage ADC‐based ROICs for 25 Μm‐pitch Cryogenic Infrared Focal Plane Array

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

High-Speed Trace Detection DROIC for 15μm-Pitch Cryogenic Infrared FPAs

A 14-Bit Hybrid Analog-to-Digital Converter for Infrared Focal Plane Array Digital Readout Integrated Circuit

High Frame Rate High Linearity Low Power DROIC for 30Μm-Pitch Cryogenic Infrared FPAs.

An Event-Driven High-Speed Imaging and Trace Detection ROIC for Cryogenic Infrared FPAs

A Compact Low-Noise Digital Pixel with 15-bit Two-Step PFM-based ADC for IRFPAs

A 16-Bit Two-Step Pixel-Level ADC for 384∗288 Infrared Focal Plane Array

Design of Readout IC for Photoelectron Detector of Short-Wave High Frequency IRFPA

A 16-Bit Pixel-level ADC Based on Ring Oscillator for 30μm Pitch 320 ×256 LWIR FPAs.

A Low Power High Linearity Cryogenic Readout Integrated Circuit with Large Charge Handling Capacity for 10 mu m Pitch 640x512 Infrared Focal Plane Array

A Digital Readout Integrated Circuit Based on Pixel-Level ADC Incorporating On-Chip Image Algorithm Calibration for IRFPA

A Low Power High Speed Readout Circuit for 320×320 IRFPA

Low Power Readout Integrated Circuit with PFM-based ADCs Employing Residue Quantization for Uncooled Infrared Imagers

A prototype of ROIC for pyroelectric uncooled IRFPA with colume-level ADC

A 14-bit 150KS/s SAR ADC with PGA for CMOS Image Sensor

Design of Readout Circuit for Microcantilever Infrared Focal Plane Array with Snapshot Integration