Abstract:This paper presents a 14-bit hybrid column-parallel compact analog-to-digital converter (ADC) for the application of digital infrared focal plane arrays (IRFPAs) with compromised power and speed performance. The proposed hybrid ADC works in two phases: in the first phase, a 7-bit successive approximation register (SAR) ADC performs coarse quantization; in the second phase, a 7-bit single-slope (SS) ADC performs fine quantization to complete the residue voltage conversion. In this work, the number of unit capacitors is reduced to 1/128th of that of a conventional 14-bit SAR ADC, which is beneficial for the application of small pixel-pitch IRFPAs. In this work, a tradeoff segmented thermometer-coded digital-to-analog converter (DAC) is adopted in the first 7-bit coarse quantization process: the lower 3-bit is binary coded, and the upper 4-bit is thermometer coded. A thermometer-coded DAC can improve the linearity of ADC. Capacitor array matching can be incredibly relaxed compared with a binary-weight 14-bit SAR ADC, resulting in a noncalibration feature. Moreover, by sharing DAC and comparator analog circuits between the SAR ADC and the SS ADC, the power consumption and layout area are consequently reduced. The proposed hybrid ADC was fabricated using a 180 nm CMOS process. The measurement results show that the proposed ADC has a differential nonlinearity of −0.61/+0.84 LSB and a sampling rate of 120 kS/s. The developed ADC achieves a temporal noise of 1.7 LSBrms at a temperature of 77 K. In addition, the SNDR is 72.9 dB, and the ENOB is 11.82 bit, respectively. Total power consumption is 71 μW from supply voltages of 3.3 V (analog) and 1.8 V (digital).

A Digital Readout Integrated Circuit Based on Pixel-Level ADC Incorporating On-Chip Image Algorithm Calibration for IRFPA

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 48 mW DROIC with 15-bit pixel-level ADC for 640x512 mid-wave infrared imagers

A 48 mW DROIC with 15-bit pixel-level ADC for 640×512 mid-wave infrared imagers

A 640×512 30μm Pixel Pitch 1.8Mk-Netd 90.1Db-Snr Digital Read-out Integrated Circuit with Fully On-chip Image Algorithm Pixel-Level Calibration

A Low-Power DROIC with Extended-Counting ADC for Uncooled Infrared Silicon Diode Detectors

14-Bit Column Readout Circuits with Single-to-differential PGA Using Intentional Offset and Two-Step Scaled-Reference SAR ADC for CMOS Image Sensors

A 16-Bit Two-Stage ADC for 320×256 Infrared Focal Plane Array

High Frame Rate High Precision ROIC with Pixel-level CCO-Based ADC for Infrared FPAs.

High Frame Rate High Linearity Low Power DROIC for 30Μm-Pitch Cryogenic Infrared FPAs.

A 14-Bit Hybrid Analog-to-Digital Converter for Infrared Focal Plane Array Digital Readout Integrated Circuit

A 160×120 ROIC with Non-uniformity Calibration for Silicon Diode Uncooled IRFPA

A LOW POWER HIGH RESOLUTION ROIC DESIGN WITH 14-BIT COLUMN-LEVEL ADC FOR 384 × 288 IRFPA

A multichannel readout integrated circuit with column-wise pseudo differential extended counting ADCs for an uncooled infrared focal plane array based on silicon diodes

A High Performance CMOS Readout Integrated Circuit for IRFPA

The Design of a Low-Noise, High-Speed Readout-Integrated Circuit for Infrared Focal Plane Arrays

Two‐stage ADC‐based ROICs for 25 Μm‐pitch Cryogenic Infrared Focal Plane Array

A low noise and high uniformity readout integrated circuit for IFPA applications

A Compact Low-Noise Digital Pixel with 15-bit Two-Step PFM-based ADC for IRFPAs

High-Speed Trace Detection DROIC for 15μm-Pitch Cryogenic Infrared FPAs