Abstract:Abstract Near-infrared (NIR, 0.7–1.4 µm) imagers have wide applications in night surveillance, material sorting, machine vision and potentially automatic driving. However, limited by the high-temperature processing and requirement of single-crystalline substrate, so far flip-chip is the dominant way to connect infrared photodiodes and silicon-based readout integrated circuit (ROIC) to produce infrared imagers, suffering from complicated process and ultra-high cost and hence limiting their widespread applications in the market. Here we report the monolithic integration of colloidal quantum dots (CQD) photodiodes with complementary metal-oxide-semiconductor (CMOS) ROIC, operating as a low-cost and high-performance imager. The CQD photodetector is well designed with a CMOS-compatible structure, demonstrating a response spectral range of 400–1300 nm, a detectivity of 2.1×1012 Jones at room temperature, a -3dB bandwidth of 140 kHz and a linear dynamic range over 100 dB. The CQD imager can identify materials, inspect apple scar and veins with a large size of 640×512 pixels and a spatial resolution of 40 lp/mm at a modulation transfer function of 50%. Monolithic integration significantly reduces the cost without sacrificing performance, thus providing huge potential for the ubiquitous deployment of infrared imagers.

A 48 mW DROIC with 15-bit pixel-level ADC for 640×512 mid-wave infrared imagers

A 48 mW DROIC with 15-bit pixel-level ADC for 640x512 mid-wave infrared imagers

A Low-Power DROIC with Extended-Counting ADC for Uncooled Infrared Silicon Diode Detectors

A Digital Readout Integrated Circuit Based on Pixel-Level ADC Incorporating On-Chip Image Algorithm Calibration for IRFPA

High Frame Rate High Linearity Low Power DROIC for 30Μm-Pitch Cryogenic Infrared FPAs.

A High-resolution Colloidal Quantum Dot Imager by Monolithic Integration

A Low-Power Single-Slope Based 14-Bit Column-Level ADC for 384×288 Uncooled Infrared Imager

Low Power Readout Integrated Circuit with PFM-based ADCs Employing Residue Quantization for Uncooled Infrared Imagers

A 16-bit Single-Slope based Pixel-level ADC for 15 mu m-pitch 640x512 MWIR FPAs

A 16-Bit Single-Slope Based Pixel-level ADC for 15Μm-Pitch 640×512 MWIR FPAs

A Readout Circuit with Current-Compensation-Based Extended-Counting ADC for 1024×768 Diode Uncooled Infrared Imagers

A 16-Bit Two-Stage ADC for 320×256 Infrared Focal Plane Array

A 14-Bit Differential-Ramp Single-Slope Column-Level Adc For 640x512 Uncooled Infrared Imager

Low Power Design Orienting 384×288 Snapshot Infrared Readout Integrated Circuits

A 16-Bit Pixel-level ADC Based on Ring Oscillator for 30μm Pitch 320 ×256 LWIR FPAs.

A Compact Low-Noise Digital Pixel with 15-bit Two-Step PFM-based ADC for IRFPAs

Design of a Pixel Readout ASIC Using Super Pixel Circuits with a Built-in LDO Regulator for Hybrid X-ray Imaging Detectors

A 640×512 ROIC with Optimized BDI Input Stage and Low Power Output Buffer for CQDs-based Infrared Image Sensor

Two‐stage ADC‐based ROICs for 25 Μm‐pitch Cryogenic Infrared Focal Plane Array

A Low Power High Linearity Cryogenic Readout Integrated Circuit with Large Charge Handling Capacity for 10 mu m Pitch 640x512 Infrared Focal Plane Array

A High Performance CMOS Readout Integrated Circuit for IRFPA