Abstract:Abstract Background: Recording of electrical activity of neurons is indispensable for decoding the information in the brain. The amplitude of signals recorded by electrodes is small, and it must be amplified to the level that can be digitalized by the analog-to-digital convert (ADC). A micro-power low-noise neural recording amplifier is indispensable for implant hippocampal cognitive prosthesis. When the process turns into deep submicron, the gate leakage current of the metal oxide semiconductor (MOS) transistor becomes larger and mismatch between devices becomes worsen. It is necessary to keep the neural amplifier robust in all process corners. Methods: The proposed circuit is a two-stage amplifier which can achieve a good trade-off between power consumption and noise. Four second-stage amplifiers share a common reference amplifier to reduce area and power consumption. A pseudo-resistor with high resistance is utilized to realize a very-low frequency high pass corner without external components. In order to minimize process variation, a bulk-compensated (BC) technique is adopted to maintain adequate tolerance in all corner case. Results: The 4-channel neural amplifier is designed and fabricated in a 40 nm standard complementary metal oxide semiconductor (CMOS) process. It achieves a mid-band gain of 54 dB, a bandwidth of 70 Hz to 7.7 kHz, a total input-referred noise of 3.2 μVrms , and a Noise Efficiency Factor (NEF) of 3.3 while consuming 4.68 µW from the 1.1 V supply. The core area of one channel is only 0.032 mm 2 . Conclusion: A 4-channel integrated neural recording amplifier chip with bias-compensated circuits is presented in this paper. Extensive simulations insure that the design is “center”. The chip layout is verified using design rules check (DRC) and layout versus schematic (LVS) design check with the help of verification tools. Test results shows that it is less sensitive to process variation and consumes less power compared with amplifier without bulk-compensated circuit. This makes the design robust and uniquely appropriate for low-power implant application.

A 128-electrodes Neural Probe with 30*55 µm<sup>2</sup> Channel Area Low-power CCO-based ADC

A Compact Quad-Shank CMOS Neural Probe With 5,120 Addressable Recording Sites and 384 Fully Differential Parallel Channels

An Implantable 455-Active-Electrode 52-Channel CMOS Neural Probe

1024-Electrode Deep Brain Probe Readout Circuit with 1024 Configurable Channels in 55nm CMOS

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

A Wireless Headstage System Based on Neural-Recording Chip Featuring 315 Nw Kickback-Reduction SAR ADC

Design of Readout Circuit Based on Probe Neural Biosensor

A 32-Site 3-D CMOS Electronic Interfaces to the Nervous System

Multimodal Integrated Flexible Neural Probe for in Situ Monitoring of EEG and Lactic Acid

A 12 μW 10 kHz BW 58.9 dB SNDR AC-Coupled Incremental ADC for Neural Recording

A 110-nW in-channel sigma-delta converter for large-scale neural recording implants

A Reconfigurable, Nonlinear, Low-Power, VCO-Based ADC for Neural Recording Applications

An Ultra-Low-Noise, Low Power and Miniaturized Dual-Channel Wireless Neural Recording Microsystem

Low-Power Fully Integrated 256-Channel Nanowire Electrode-on-Chip Neural Interface for Intracellular Electrophysiology

A heterogenous integrated neural recording system with elastocapillary self-assembled Au-PDMS-PEG neural probe and customized ASIC

An event-driven SoC for neural recording.

An 112-Ch Neural Signal Acquisition SoC With Full-Channel Read-Out and Processing Accelerators

An Ultra Compact Neural Front-End with CT-NEO Based Spike Detection for Implantable Applications

32-Channel Full Customized Cmos Biosensor Chip For Extracellular Neural Signal Recording

A 64-Channel Versatile Neural Recording SoC With Activity-Dependent Data Throughput

A 16-Channel Fully Configurable Neural SoC With 1.52 μW/Ch Signal Acquisition, 2.79 μW/Ch Real-Time Spike Classifier, and 1.79 TOPS/W Deep Neural Network Accelerator in 22 nm FDSOI