Abstract:Activated carbons, with a double pHzpc characteristic, are made from activated waste tires‐char treated with KOH under CO2 gas. This process results in a BET surface area of 1841 m2/g and a pore volume of 0.869 cm3/g. Using this AC significantly enhances the removal efficiency by 44 % for Cr(VI) and 34 % for Cd(II). Five consecutive cycles validate the carbon's stability and regeneration capabilities. In this study, waste tires (WTs) were carbonized under an N2 atmosphere. Subsequently, KOH/WTs‐char with KOH‐assisted CO2 activation was used to prepare activated carbon (AC) as a highly porous carbon material for the removal of Cr(VI) and Cd(II) from water. Various techniques such as elemental analysis, Fourier‐transform infrared spectroscopy, scanning electron microscopy, and N2 adsorption/desorption were employed to investigate the physical and chemical characteristics of the prepared carbons. The WTs‐char activated with KOH under CO2 exhibited a microstructure with a high BET surface area and pore volume of 1841 m2/g and 0.869 cm3/g, respectively, demonstrating excellent adsorbent performance. The maximum removal efficiencies of 99.91 % for Cd(II) and 99.81 % for Cr(VI) were achieved using AC2 carbon under the following conditions: pH 2 for Cr(VI) and pH 5 for Cd(II), contact time of 120 min, adsorbent dose of 0.4 g/100 mL, and temperature of 298 K. The adsorption kinetics followed the pseudo‐second‐order equation, and the equilibrium data fit well with the Redlich–Peterson isotherm equation. The positive values of ▵G indicated that the uptake process for both ions was nonspontaneous and nonfeasible over the temperature studied. Both ions showed negative values of ΔH and ΔS on carbon, suggesting exothermic adsorption and a decrease in disorder. Regeneration studies showed that NaOH was a better desorbing agent than HCl. Cr(VI) desorption resulted in over 90 % removal recovery by AC2 using 1.0 M NaOH even after the fifth cycle. However, the low activation energy indicated that the adsorption was favorable kinetically. Overall, this study demonstrated the effective preparation of highly porous carbon and its successful performance in removing Cr(VI) and Cd(II) ions.

Regeneration of Hexamminecobalt(ii) Catalyzed by Activated Carbon Treated with KOH Solutions

Experimental study of hexamminecobalt (Ⅲ) regeneration by halide ions

Alkali-resistant Catalytic Reduction of NO over CeO2-WO3/MCM-22 Supported Catalyst by Releasing Brønsted Acid Sites

Co/N co-doped carbonaceous polyhedron as efficient peroxymonosulfate activator for degradation of organic pollutants: Role of cobalt

Research over the effect of activated carbon treated with calcium nitrate solution on the catalytic ability in the reduction of Co(III)Triethylenetetramine

Regeneration of Cobalt Complexes by Thermal Decomposition and Acid Treatment for NO Absorption

Unveiling the Role of Cobalt Species in the Co/N-C Catalysts-Induced Peroxymonosulfate Activation Process.

Investigations of NO reduction by coal-based activated carbon with KOH activation: Performance and mechanism

Performance of Several Cobalt-Amine Denitration Solutions and Their Catalytic Regeneration by Graphene

Preparation of High Specific Surface Area and High Adsorptive Activated Carbon by KOH Activation

Highly Porous Carbon Materials Prepared Through KOH‐Assisted CO2‐Activation of Carbonized Waste Tires for Removal of Cr(VI) and Cd(II) from Water

Regulating potassium state to enable the high performance of Co3O4 for catalytic oxidation

Removal of cobalt ions (II) from simulated radioactive effluent by electrosorption on potassium hydroxide modified activated carbon fiber felt

Highly Selective O 2 Reduction to H 2 O 2 Catalyzed by Cobalt Nanoparticles Supported on Nitrogen-Doped Carbon in Alkaline Solution

An Effective Strategy to Synthesize Well-Designed Activated Carbon Derived from Coal-Based Carbon Dots via Oxidation before Activation with a Low KOH Content as Supercapacitor Electrodes

Elucidating the role of potassium addition on the surface chemistry and catalytic properties of cobalt catalysts for ammonia synthesis

Adsorption of cobalt (III) by HCl and H 2O 2 modified activated carbon

Enhanced CO2 photocatalytic reduction on alkali-decorated graphitic carbon nitride

Effect of ZnCl2, H3PO4, and KOH activation on low‐temperature NH3‐denitration performance of activated carbon

Regeneration of Alkali Poisoned TiO2-based Catalyst by Various Acids in NO Selective Catalytic Reduction with NH3

MOF-derived hollow Co@N-doped carbon as an efficient peroxymonosulfate activator for acetaminophen degradation: Dominant sulfate radical-induced degradation pathway