Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Compact 3-D Printed Phase-Shifting Coupler with Decoupling Column and Defected Ground Structures for Millimeter Wave Applications

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

Novel millimeter wave power-combining system in 3-D packaging level

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Compact and broadband dual-polarization waveguide crossing utilizing subwavelength-hole-assisted MMI couplers

Design and Performance Analysis of Compact Printed Ridge Gap Waveguide Phase Shifters for Millimeter-Wave Systems

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

A Compact Wideband Branch Line Coupler for Lower 5G Applications

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

A Compact Dual-Band Coupler With Coupled Microstrip–Slotlines

Waveguide-to-substrate, vertical bend coupler design for 3D photonic integrated circuits