Abstract:Most MPC (Model Predictive Control) algorithms used in industries and studied in the control academia use a two-term QP (quadratic programming), where the first term is the weighted norm of the output errors, and the second term is that of the input increments. In this work, a DMC (Dynamic Matrix Control) algorithm that uses three-term QP is developed and studied, where the third term is the weighted norm of the output increments. A relationship between the three-term DMC and the two-term DMC is established; and based on that, ideal closed-loop response curves are derived. These results are useful for the tuning of the three-term DMC. Then, a method for comparing two control methods is proposed and it is shown that the three-term DMC outperforms the two-term DMC. The findings are verified using simulation studies. Finally, the three-term DMC is successfully applied to a 1030 MW ultra-supercritical coal-fired power plant. According to simulation study using the identified model, in comparison to traditional two-term DMC, there is a roughly 10% reduction in the standard deviation of load tracking error for similar control efforts. In real-life tests on the power plant, the performance of the three-term DMC is compared to that of the existing PID controller. The load rate of change increased from 0.8%/min to 1.5%/min while the standard deviation of steam pressure decreased 38%; the standard deviations of the main steam temperature and reheat steam temperature decreased more than 40% with their mean values increased by more than 2 ∘C and 4 ∘C respectively.

Field Application of Multiple Model Predictive Control for Superheat Temperature in Boilers

Predictive Control and Economic Performance Optimization of CFBB Combustion Process

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

A Power Plant Coordinated Control System Using MPC

Identification and predictive control for a circulation fluidized bed boiler

Application of Multi-variable Model Predictive Control to Automatic Variable-loading of Air Separation Unit

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Model Predictive Control of a Solar Power System with Microturbine and Thermochemical Energy Storage

Nonlinear model predictive control of HTR-PM load changing process

Support vector machine based predictive functional control design for output temperature of coking furnace

Identification and MPC Control of a Circulation Fluidized Bed Boiler Using an LPV Model

Multivariable Predictive Control of the Main Steam Temperature in Power Plant

Two-timescale Nonlinear Model Predictive Control for Flexible Operation of Coal-Fired Power Plant with Post Combustion CO2 2 Capture System

Application of Constrained Predictive Model to Power Plant Superheated Steam Temperature Control

Generalized Predictive Control for Superheated Steam Temperature Regulation in a Supercritical Coal-Fired Power Plant

Modelling and regulation of steam temperatures of a 1000-MW double-reheat boiler with long short-term memory

Dynamic matrix model predictive control of coal feeder speed of a supercritical power plant

Multi-layer Perception Based Model Predictive Control for the Thermal Power of Nuclear Superheated-Steam Supply Systems

Engineering Applications of Multi-Model Internal Mode Control for the Superheated Steam Temperature