Abstract:This paper presented a model predictive control strategy to optimize the operation of the transcritical CO2 air conditioning system used in railway vehicles, which had to balance the needs of the passengers' comfort with energy-saving effects. In this work, the discharge pressure and evaporator air volume flow rates were optimized while maintaining comfort using a multi-variable control technique called model predictive control strategy. The objective function and the predictive model, which were proposed in this work combining data and physical laws, were the basis for the model predictive controller's ability to foresee future operation-conditions and calculate the optimal inputs. The validation results showed that the prediction error was less than 4.5%. The model predictive controller was adopted in GT-SUITE platform to realize the real-time maximization of the energy efficiency and maintain comfort requirement by adjusting discharge pressure, evaporator air volume flow rate and compressor speed. The simulation was conducted under fixed conditions and realistic conditions. As for the fixed conditions, the coefficient of performance achieved at 2.24, equaling to the maximum value of the map. Under the realistic conditions, the overall energy consumption of the control method using the MPC strategy was lower than that using the PID control strategy, and the average COP was increased by 7.4%. Further, there was a 1% error in coefficient of performance between the extreme value gained by the model predictive control method and the extreme value offered by the map method, which validated that the model predictive control strategy can be an effective control method for the optimal operation of the transcritical CO2 air conditioning system.

Application of Multi-variable Model Predictive Control to Automatic Variable-loading of Air Separation Unit

Multi-rate Multivariable Model Predictive Control For Integrating Processes

Multivariable Model Predictive Control for Integrating Processes with Input Constraints

Nonlinear Model Predictive Control Based on Variable Gain

Nonlinear model predictive control of HTR-PM load changing process

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Economic Performance Assessment of Multivariable Model Predictive Control Based on Linear Quadratic Gaussian Benchmark

Multi-Model Predictive Control Based on a New Clustering Modeling Method

A Power Plant Coordinated Control System Using MPC

Dynamic Load Change Operation Education in Air Separation Processes Using a Multivariable and Nonlinear Model

Multivariable Constrained Predictive Control and Its Application to A Commercial Turbofan Engine

Support Vector Machine-Based Multi-Model Predictive Control

Stabilizing Model Predictive Control Strategy for Permanent Magnet Synchronous Motor with Multi-Variable Constraints

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

Model Predictive Control with an On-Line Identification Model of a Supply Chain Unit

The Model Predictive Control Strategy of the Transcritical Co2 Air Conditioning System Used in Railway Vehicles

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

Multi-model Predictive Control of Ultra-supercritical Coal-fired Power Unit

Application of multivariable model prediction control to Ultra-supercritical unit

Multi-variable Predictive Control with Output Zone Goals

Application of robust multi-variable predictive control technology in CDU