Abstract:To accommodate the integration of renewable energy, coal-fired power plants must take on the task of peak regulation, making the low-load operation of boilers increasingly routine. Under low-load conditions, the phase transition point (PTP) of the working fluid fluctuates, leading to potential flow instability, which can compromise boiler safety. In this paper, a one-dimensional coupled dynamic model of the combustion and hydrodynamics of a supercritical boiler is developed on the Modelica/Dymola 2022 platform. The spatial distribution of key thermal parameters in the furnace and the PTP position in the water-cooled wall (WCW) are analyzed in a 660 MW supercritical boiler when parameters on the combustion side change under full-load and low-load conditions. The dynamic response characteristics of the temperature, mass flow rate, and the PTP position are investigated. The results show that the over-fire air (OFA) ratio significantly influences the flue gas temperature distribution. A lower OFA ratio increases the flue gas temperature in the burner zone but reduces it at the furnace exit. The lower OFA ratio leads to a higher fluid temperature and shortens the length of the evaporation section. The temperature difference in the WCW outlet fluid between the 20% and 60% OFA ratios is 11.7 °C under BMCR conditions and 7.4 °C under 50% THA conditions. Under the BMCR and 50% THA conditions, a 5% increase in the coal caloric value raises the flue gas outlet temperature by 32.7 °C and 35.4 °C and the fluid outlet temperature by 6.5 °C and 9.9 °C, respectively. An increase in the coal calorific value reduces the length of the evaporation section. The changes in the length of the evaporation section are −2.95 m, 2.95 m, −2.62 m, and 0.54 m when the coal feeding rate, feedwater flow rate, feedwater temperature, and air supply rate are increased by 5%, respectively.

Engineering Applications of Multi-Model Internal Mode Control for the Superheated Steam Temperature

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

Field Application of Multiple Model Predictive Control for Superheat Temperature in Boilers

Modelling and regulation of steam temperatures of a 1000-MW double-reheat boiler with long short-term memory

Model-Based Load Following Control for Helical-Coiled Supercritical Steam Generator of MHTGR

Modeling and Control Scheme Design of a Multi-Modular High Temperature Gas Cooled Reactor Cogeneration Unit

A Composite Nonlinear Control Scheme of the Ultra-Supercritical Boiler-Turbine Unit for Large-Scale Load Accommodation

A dynamic mathematical model used for controller design of a supercritical once-through boiler-turbine unit in all load conditions

Multivariable Internal Mode Control for the Furnace Temperature of Waste Incinerators

Modeling and Simulation of the Long-term Dynamic Characteristics of a Supercritical Once-through Boiler

Multivariable Predictive Control of the Main Steam Temperature in Power Plant

Modeling and Simulation of Superheated Steam Temperature Based on Multi-objective Genetic Algorithm

Identification and predictive control for a circulation fluidized bed boiler

Dynamic performance analysis and control strategy optimization for supercritical coal-fired boiler: A dynamic simulation

Simulation of Dynamic Characteristics of Supercritical Boiler Based on Coupling Model of Combustion and Hydrodynamics

Modeling of drum boiler-turbine unit and the model-based coordinated control strategy

Study on Nonlinear Control Model of Supercritical (Ultra Supercritical) Circulating Fluidized Bed Unit

A hybrid receding horizon optimization and active disturbance rejection control of boiler superheated steam temperature

Simultaneous stable control of temperature field distribution uniformity and consistency for multi-temperature zone systems