Abstract:Recently MXenes become the focus of emerging 2D layered materials family owing to their unique properties and promising potential in gas detection. However, the sensitivity and the stability of the pristine MXenes are poor due to their high carrier concentration and abundant active sites on the surface. Herein, superior NH3 sensors with high response and stability were successfully obtained by wrapping the SnO2 nanoparticles on Ti3C2Tx MXene nanosheets via a facile hydrothermal method. The nanostructures, morphologies, and compositions of the Ti3C2Tx MXene-SnO2 composite were systematically characterized by XRD, FTIR, SEM, TEM and XPS techniques. Results show that SnO2 nanoparticles with high specific surface area are uniformly dispersed on the Ti3C2Tx MXene surface, constructing loose heterostructure, which plays a crucial role in gas adsorption/desorption. In the Ti3C2Tx MXene-SnO2 heterostructure, the Ti3C2Tx MXene acts as a signal amplification channel for electron transfer in gas sensing reaction. The sensors exhibit excellent NH3 gas detection at room temperature. Response as high as 75% is observed for 500 ppm NH3 gas. Fast response and recovery times are also obtained, 109 and 342 s, respectively. Moreover, the sensing performances of the Ti3C2Tx MXene-SnO2 composite with various MXene ratios were systematically studied. It is found out that the 16.8%Ti3C2Tx-SnO2 based sensor shows the highest sensitivity in 10∼100 ppm range, and the 9.1%Ti3C2Tx-SnO2 based sensor exhibits the widest detection range. In addition, the selectivity and repeatability were also studied, revealing high selectivity and stability of the Ti3C2Tx MXene-SnO2 composite. Thus, Ti3C2Tx-SnO2 composite provides a new material to design and develop superior room temperature NH3 gas sensors.

Enhanced NH3 Gas Sensing Performance Based on Electrospun Alkaline-Earth Metals Composited SnO2 Nanofibers

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Surface Enhancement Effects of Tiny SnO 2 Nanoparticle Modification on α-Fe 2 O 3 for Room-Temperature NH 3 Sensing

SnO2 Nanoparticle-Coated In2O3 Nanofibers with Improved NH3 Sensing Properties

A highly sensitive room-temperature sensing material for NH3: SnO2-nanorods coupled by rGO

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Micropored Sn-SnO 2 /carbon heterostructure nanofibers and their highly sensitive and selective C 2 H 5 OH gas sensing performance

Enhanced and stable gas sensing performance towards NH3 with AuCu alloy nanoparticles modification over SnO2

Room‐Temperature NH3 Sensor Based on SnO2 Quantum Dots Functionalized SnS2 Nanosheets

SnO2/SnS2 Nanotubes for Flexible Room-Temperature NH3 Gas Sensors

Ultra-sensitive NH3 sensor based on flower-shaped SnS2 nanostructures with sub-ppm detection ability.

B4.4 - Mesoporous Al-doped SnO2 Nanotubes with Enhanced Gas-Sensing Properties Fabricated by Electrospinning

Precise Preparation of WO3@SnO2 Core Shell Nanosheets for Efficient NH3 Gas Sensing.

SnO<sub>2</sub> nanoparticles-modified 3D-multilayer MoS<sub>2</sub> nanosheets for ammonia gas sensing at room temperature

Effects of SnO2 Additives on Nanostructure and Gas-Sensing Properties of Α-Fe2o3 Nanotubes

High-Sensitive Ammonia Sensors Based On Tin Monoxide Nanoshells

Effects of Al Doping on Sno2 Nanofibers in Hydrogen Sensor

Flower-like MoS2 Hierarchical Architectures Assembled by 2D Nanosheets Sensitized with SnO2 Quantum Dots for High-Performance NH3 Sensing at Room Temperature

Mn-doped ZnO/SnO2-based yarn sensor for ammonia detection

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor