Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

B4.4 - Mesoporous Al-doped SnO2 Nanotubes with Enhanced Gas-Sensing Properties Fabricated by Electrospinning

Enhanced Ethanol-Sensing Characteristics of Au Decorated In-doped SnO2 Porous Nanotubes at Low Working Temperature

Synthesis of flowerlike nano-SnO2 and a study of its gas sensing response

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Fabrication and Gas Sensing Properties of Hollow Core–shell SnO2/α-Fe2O3 Heterogeneous Structures

NiO@ZnO Heterostructured Nanotubes: Coelectrospinning Fabrication, Characterization, and Highly Enhanced Gas Sensing Properties.

Enhanced Gas Sensing Properties of Aligned Porous SnO 2 Nanofibers

Ordered Mesoporous Tin Oxide Semiconductors with Large Pores and Crystallized Walls for High-Performance Gas Sensing

8.4.4 Enhanced H2S Sensing Properties of Porous SnO2 Nanofibers Modified with CuO

Preparation of gas sensors by hollow SnO 2 electrospun nanofibers

Preparation and gas-sensitive properties of hollow Zn2SnO4/SnO2 nano-cubes

Templating Synthesis of Sno2 Nanotubes Loaded with Ag2o Nanoparticles and Their Enhanced Gas Sensing Properties

The fabrication of In2O3 nanowire and nanotube by single nozzle electrospinning and their gas sensing property

A Novel Hetero-Structure Sensor Based on Au/Mg-doped TiO2/SnO2 Nanosheets Directly Grown on Al2O3 Ceramic Tubes

Gas Sensors Based on Semiconductor Metal Oxides Fabricated by Electrospinning: A Review

Enhanced H2S Sensing Properties of Porous SnO2 Nanofibers Modified with CuO

Synthesis of Self-Assembled 3D Hollow Microspheres of SnO2 with an Enhanced Gas Sensing Performance

AlN Nanotube Decorated with Small Tin Oxide Clusters as a Novel CH 4 Sensing Material

Enhanced surface electron migration of porous and hollow SnO2/Zn2SnO4 heterostructures for efficient triethylamine-sensing performance

Preparation of {200} crystal faced SnO 2 nanorods with extremely high gas sensitivity at lower temperature

Chemiresistive gas sensors based on electrospun semiconductor metal oxides: A review