Abstract:This article presents a method to design a single-band (SB)/dual-band (DB) bandpass filter (BPF)-integrated single-pole double-throw (SPDT) switch by using one/two distributed coupling identical tri-mode resonator (TMR) pairs loaded with opposite polarity p-i-n diodes. Moreover, the proposed method is also directly suitable for designing the multiple-band (MB) BPF-integrated SPDT switch by simply increasing the used numbers of identical TMR pairs. As an example, a SB-BPF-integrated SPDT switch with the central frequency (CF) of 1 GHz and the ripple bandwidth (RBW) of 65 MHz is first designed by using one identical switchable TMR pair, so as to validate our design approach. Due to the inherent property of TMR and the introduced source-load coupling, high ON-state passband selectivity is achieved. Then, two switched 50- $\Omega $ matching circuits are connected to two noncommon feeding lines, and an SB-BPF-integrated SPDT switch with absorptive OFF-state property is also realized. Finally, a DB-BPF-integrated SPDT switch with CFs of 0.9 GHz/1.8 GHz and RBWs of 50 MHz/105 MHz is designed by simply employing two identical TMR pairs. When the operating states of two identical switchable TMR pairs are specifically chosen, the proposed DB-BPF-integrated SPDT switch exhibits multiple functions, i.e., the 900/1800 SB-BPF-integrated SPDT switches with absorptive OFF-state property, the 900/1800 DB-BPF-integrated SPDT switch with absorptive OFF-state property, and the 900/1800 diplexer-integrated SPDT switch. The measured results also show that these switches exhibit low ON-state passband losses, deep out-of-band rejections (OBRs) of ON-state passbands, high OFF-state suppressions (OSSs), high port-to-port isolations (PPIs), and compact circuit sizes.

Development of Multi-Channel High-Power Broadband High Linearity RF Switch Based on PIN Diode

Microwave high-power PIN switch and its application to variable polarization antenna

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

Non‐Hermitian Loss‐driven Broadband Low‐Loss On‐chip Terahertz Photonic SPDT Switch

Wideband-Filtering Switches with Ultra-Wide Stopband Using P-I-N Diodes Loaded on Slotline

A Compact Wideband SPDT Switch Using Compensating Inductors and Highpass Matching Network

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

A 0.5–3.0 GHz SP4T RF Switch with Improved Body Self-Biasing Technique in 130-Nm SOI CMOS

Design of W-band PIN Diode SPDT Switch with Low Loss

Design Of A High Speed Sp4t Switch At Ka-Band

A Microwave Single-Pole Double-Throw T/R Switch Integrating Bandpass Response

Coaxial Feeding BPF Integrated SP7T Switch

Single-/Dual-Band Bandpass Filter-Integrated Single-Pole Double-Throw Switch Using Distributed Coupling Tri-Mode Resonators

Design of BPF-Integrated SPDT Switch Based on Slotline Resonators Loaded with Diodes.

A CMOS SPDT RF Switch with 68 Db Isolation and 1.0 Db Loss Feathering Switched Resonance Network for MIMO Applications

Design and development of high power SP9T switch

GaAs PIN Diode Based 220 GHz Switch Design Using Flip Chip Technique

A Bandpass Filtering Switch with High out of Band Isolation Based on PIN Diodes

A High-power Microwave Switch Design

A Wideband Bandpass Filter Integrated Single-Pole Double-Throw Switch with Wide Stopband

Low-insertion loss pin diode switches using impedance-transformation networks