Abstract:The activated iron-based shape memory alloy (Fe-SMA) can introduce considerable prestress in the damaged zone of deteriorated steel structures through bonding technologies. In China, it has been successfully applied to several kilometer-span steel bridges, such as Sutong Bridge and Hangzhou Bay Bridge. The shear and interfacial performance of steel-to-Fe-SMA plates are crucial issues in bonding Fe-SMA to reinforce deteriorated steel structures, which remain unclear. This paper investigates the shear characteristics of Fe-SMA/steel single lap joints (SLJs), considering the effects of adhesive types, adhesive layer thicknesses and overlap lengths. The stress distribution and the interfacial shear stress at the overlap zone are obtained through experiments, and the damage evolution and load-transfer mechanisms of adhesive layers are analyzed. The experimental outcomes indicate that the maximum tensile stresses of Fe-SMA plates can reach 61 % of their ultimate strength. The failure modes and ultimate load of Fe-SMA/steel SLJs are affected by adhesive types. Interface failure occurs in CH 120 and PCMdurTM-15 specimens, whereas interface, cohesive and mixing failure are formed in Sika 31 specimens. Due to the adverse effects of adhesive layer defects, out-of-plane bending moment, and damage accumulation of the adhesive layers, the distribution of surface strain and interfacial shear stress of all specimens are mainly at the effective overlap zone. For an efficient engineering design, the linear and polynomial fitting models of cohesive zone models with different adhesive types and adhesive layer thicknesses are proposed based on experiments. The experimental and theoretical achievements can provide design recommendations for deteriorated steel structures rehabilitated by bonding Fe-SMA.

EXPERIMENTAL STUDIES ON FLEXURAL PERFORMANCE OF ADHERENCE FLUSH JOINTS FOR COMPOSITE SANDWICH STRUCTURES

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Experimental study on flexural capacity of steel plate-concrete composite slabs

Experimental study on flexural performance of tooth-plate-glass-fiber hybrid sandwich beams

Mechanical Properties of L-joint with Composite Sandwich Structure

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Design improvement of a composite-to-steel butt-joint based on finite element analysis

Mechanical behavior of novel GFRP foam sandwich adhesive joints

EXPERIMENTAL RESEARCH ON THE FLEXURAL PROPERTIES OF PAULOWNIA WOOD CORE COMPOSITE SANDWICH PANEL REINFORCED BY LATTICE WEBS

Experimental Investigation on Hybrid Structure of Novel Metal to Composite

EXPERIMENT AND THEORETICAL ANALYSIS ON FLEXURAL FAILURE MODE OF COMPOSITE SANDWICH BEAMS

Bending properties of U-shaped FRP composite sandwich panels

Flexural Behaviours of One-Way Steel-Concrete-steel Sandwich Panels with Novel Hybrid Connectors: Tests and Analysis

Mechanical Performance And Fracture Bahavior Of Adhesive-Multi Pin Joints Between Composite And Metallic Materials

Experimental and Numerical Analysis of Geometry on Joint Strength in GFRP-aluminum Alloy Adhesive Joints

Flexural Behaviour of GFRP-Softwood Sandwich Panels for Prefabricated Building Construction

Experimental and theoretical study on mechanical performance of Fe-SMA/steel single lap joints

Experimental and numerical research on flexural behavior of fiber metal laminate sandwich composite structures with 3D woven hollow integrated core

Experimental and theoretical analysis on flexural behavior of composite sandwich steel bridge deck