Abstract:Joint design is one of the crucial tasks in airframe structure design, especially for joining metal structures with composite structures. As composite material gaining its popularity in aviation, many new kinds of joints are being proposed. Therefore, a comprehensive understanding of their mechanical properties, such as the strength and failure mechanism, has great importance for the improvement of structural reliability and joint efficiency.In this study, a new kind of adhesively bonded metal-composite joint was designed to investigate the potential improvement in joint strength and stress distribution. One end of the steel plate, which was a large rectangular region, was embed in composite laminate. The other end was much narrow and extended from the inside of the composite laminate. During the specimen manufacturing procedure, a steel plate was machined into a particular shape and a corresponding carbon fiber preform, with the carbon fiber tows held by polyester threads in a certain ply sequence, was constructed. The steel plate was inserted into the cavity of the preform. Combination of the steel plate and carbon fiber preform was then put into a matched mould and was co-cured by injecting liquid BMI resin. Static tensile tests were then conducted on two kinds of metal-composite joints with varied shapes of steel plate tip, which were tapered and blunt respectively. Test results showed the one with blunt tip had higher final failure strength, reason of which maybe the tapered tip led to unsymmetry in stress distribution across the section. It indicated that the unsymmetry load distribution between the two sides resulted in earlier damage in the interface between steel plates and composite laminates, and easier fracture around the edge of the composite laminates where the steel plates extended from. In the end, comparisons between this new metal-composite joint with tradition adhesively bonded references show the improvement in joint strength and joint efficiency.

Mechanical Properties of L-joint with Composite Sandwich Structure

Parameter Optimization of L-joint of Composite Sandwich Structure Based on BP-GA Algorithm

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Failure Mechanism and Strength Prediction Model of T-Joint of Composite Sandwich Structure

Assessment of Tensile Behavior and Failure Mechanism in the Two Integrated Composite Joints

Assessment of the Load Carrying Performance of Composite Cross Joints

Mechanical behavior of novel GFRP foam sandwich adhesive joints

Design and Analysis of a Novel Carbon Fiber Reinforced Polymer Sandwich Adhesive Joint

Experimental Study on Composites with Single-Lap Countersunk Head Bolt Joints

Experimental Investigation On Performance Of Composite Joints With Embedded Steel Plate

Mechanical Behavior of CFRP Lattice Core Sandwich Bolted Corner Joints

Mechanical behavior of the CFRP lattice core sandwich bolted splice joints

STUDY ON COMPOSITE HONEYCOMB SANDWICH STRUCTURE FORMED T-JOINTS UNDER TENSILE LOAD

Strength prediction of composite π joint under bending load and study of geometric and material variations effects

Study Progress in Carbon Fiber Reforced Composite Joint

Mechanical property of hybrid lattice-to-steel joint with pyramidal carbon fiber truss

Investigations on the Mechanical Properties of Composite T-Joints with Defects under Bending Loading

Bending Performance of a Jute Fiber and Epoxy Resin Composite Sandwich Structure with a Bi-directional Corrugated Truss Core

Experimental Investigation of Double-Lap Bolted Composite Joints with Different Outer Plates Subjected to Bending Loads

Quasi-static Mechanical Properties of Composite Lattice Sandwich Structures with Enhanced Face Panels

Mechanical Properties of the Composite Sandwich Structures with Cold Formed Profiled Steel Plate and Balsa Wood Core