Abstract:Transformation into electric or photoelectric functional composite from non-conjugated polymers is a great challenge due to the presence of a large number of locative states. In this paper, carbon nanofiber was synthesized via hydrothermal carbonization utilizing carboxymethyl cellulose as a precursor, and the carbon nanofiber/Cu nanocomposite was constructed for defect passivation. The results indicated that the resulting nanocomposites exhibited good absorbance in visible light range and NIR (near-infrared). The photoconductive responses to typical weak visible light (650 nm et al.) and NIR (808, 980, and 1064 nm) were studied based on Au gap electrodes on flexible polymer substrates. The results exhibited that the nanocomposite’s solid thick film showed photocurrent-switching behaviors to visible light and NIR, the switch-ratio was depending on the wavelengths and power of incident lights. The positive and negative photoconductance responses phenomenon was observed in different compositions and changing excited wavelengths. Their photophysical mechanisms were discussed. This illustrated that the nanocomposites easily produce free electrons and holes via low power of incident light. Free electrons and holes could be utilized for different purposes in multi-disciplinary fields. It would be a potential application in broadband flexible photodetectors, artificial vision, simulating retina, and bio-imaging from visible light to NIR. This is a low-cost and green approach to obtain nanocomposite exhibiting good photocurrent response from the visible range to NIR.

An Integrated “energy Wire” for Both Photoelectric Conversion and Energy Storage

Innentitelbild: An Integrated “Energy Wire” for both Photoelectric Conversion and Energy Storage (Angew. Chem. 48/2012)

Inside Cover: an Integrated “energy Wire” for Both Photoelectric Conversion and Energy Storage (angew. Chem. Int. Ed. 48/2012)

A Novel “energy Fiber” by Coaxially Integrating Dye-Sensitized Solar Cell and Electrochemical Capacitor

Polymer-Derived Carbon Nanofiber and Its Photocurrent-Switching Responses of Carbon Nanofiber/Cu Nanocomposite in Wide Ranges of Excited Light Wavelength

An Integrated Device For Both Photoelectric Conversion And Energy Storage Based On Free-Standing And Aligned Carbon Nanotube Film

All Carbon Nanotube Fiber Electrode-Based Dye-Sensitized Photovoltaic Wire

A Twisted Wire‐Shaped Dual‐Function Energy Device for Photoelectric Conversion and Electrochemical Storage

Intertwined Aligned Carbon Nanotube Fiber Based Dye-Sensitized Solar Cells

Innenrücktitelbild: Carbon Nanotubes Bridged with Graphene Nanoribbons and Their Use in High‐Efficiency Dye‐Sensitized Solar Cells (angew. Chem. 14/2013)

Designing aligned inorganic nanotubes at the electrode interface: towards highly efficient photovoltaic wires.

Efficient Dye-Sensitized Photovoltaic Wires Based On An Organic Redox Electrolyte

Aligned Carbon Nanotube Fiber for Energy Conversion and Storage

Porous Titanium Nitride Nanowire Array on Carbon Fiber for the Applications in Fiber-Shaped Solar Cell and Lithium-Ion Battery

Low-cost Nanocarbon Electrodes on Arbitrary Fibrous Substrates As Efficient Bifacial Photovoltaic Wires

A novel fabrication of a well distributed and aligned carbon nanotube film electrode for dye-sensitized solar cells

Polymer photovoltaic wires based on aligned carbon nanotube fibers

Dye-Sensitized Solar Cells with Vertically Aligned Tio2 Nanowire Arrays Grown on Carbon Fibers

Carbon nanowires promoted Cu2O/TiO2 nanocomposite for enhanced photoelectrochemical performance

Cellulose nanofiber-templated three-dimension TiO2 hierarchical nanowire network for photoelectrochemical photoanode

Energy Fibers: Self‐Powered Energy Fiber: Energy Conversion in the Sheath and Storage in the Core (adv. Mater. 41/2014)