Abstract:Sodium ion batteries are realistic and promising alternatives to lithium due to the abundance of Na and the similar intercalation chemistry of Na when compared to the lithium counterpart. Developing high-power and high-energy sodium batteries is still a significant challenge. Na3V2(PO4)(2)F-3 (NVPF) has been shown to combine excellent charge discharge kinetics with a competitively high voltage. However, the major issue is, as for the vast majority of electrode materials, the lack of distinct knowledge of fundamental transport parameters, on which an optimized strategy for developing a high-power and high-energy sodium cathode can be based. This work aims at filling this gap. We experimentally investigate the intrinsic ionic and electronic conductivities, as well as the chemical diffusion coefficient of sodium of Na3V2(PO4)(2)F-3 by impedance and dc polarization. On the basis of these results, we develop an optimized design. As the electronic conductivity is found to be much smaller than the ionic one, electronic wiring of the particles (by a graphene network) has higher priority than providing electrolyte contact. This is important since the contact by graphene and electrolyte wetting is partly antagonistic, not so much because of interfacial tensions rather because of the introduced heterogeneities on the nanoscale (cf. Lotus effect). We develop and apply a one-step cost-effective low temperature hydrothermal method without any postheat treatment for the fabrication of a nanoparticulate (similar to 30-50 nm) NVPF electrode, which provides sufficient porosity and in which every nanoparticle is connected to the graphene network. In terms of rate capability, the performance of this electrode is excellent and at least belongs to the best Na storage performances reported for Na3V2(PO4)(2)F-3 so far.

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires As High‐Power Cathode Materials for Sodium‐Ion Batteries

Ruthenium-oxide-coated sodium vanadium fluorophosphate nanowires as high-power cathode materials for sodium-ion batteries.

ChemInform Abstract: Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires As High‐Power Cathode Materials for Sodium‐Ion Batteries.

Low Crystallinity VOOH Hollow Microspheres As an Outstanding High-Rate and Long-Life Cathode for Sodium Ion Batteries

High‐Rate, Durable Sodium‐Ion Battery Cathode Enabled by Carbon‐Coated Micro‐Sized Na3V2(PO4)3 Particles with Interconnected Vertical Nanowalls

Ultra-Long Nanorods Of Single-Crystalline Na0.44mno2 As Cathode Materials For Sodium-Ion Batteries

Hierarchical Ru-doped sodium vanadium fluorophosphates hollow microspheres as a cathode of enhanced superior rate capability and ultralong stability for sodium-ion batteries

2D-Lamellar Stacked Na3V2(PO4)2F3@RuO2 As a High-Voltage, High-Rate Capability and Long-Term Cycling Cathode Material for Sodium Ion Batteries

High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries

Sodium Rich Vanadium Oxy-Fluorophosphate - Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O - as Advanced Cathode for Sodium Ion Batteries

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

Oxygen-Tuned Na 3 V 2 (PO 4 ) 2 F 3–2 y O 2 y (0 ≤ y < 1) as High-Rate Cathode Materials for Rechargeable Sodium Batteries

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Oxygen-Tuned Na3V2(PO4)2F3-2yO2y (0 Y < 1) As High-Rate Cathode Materials for Rechargeable Sodium Batteries

P2-Type Layered Na 0.75 Ni 1/3 Ru 1/6 Mn 1/2 O 2 Cathode Material with Excellent Rate Performance for Sodium-Ion Batteries

Structurally Modulated Na4–xFe3–xVx(PO4)2P2O7 by Vanadium Doping for Long-Life Sodium-Ion Batteries

Electronic structure regulation of Na2FePO4F cathode toward superior high-rate and high-temperature sodium-ion batteries

A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization

P2-Type Layered Na0.75Ni1/3Ru1/6Mn1/2O2 Cathode Material with Excellent Rate Performance for Sodium-Ion Batteries

Annealed Nav3o8 Nanowires with Good Cycling Stability As A Novel Cathode for Na-Ion Batteries

Yolk‐Shell Construction of Na3V2(PO4)2F3 with Copper Substitution Microsphere as High‐Rate and Long‐Cycling Cathode Materials for Sodium‐Ion Batteries