Abstract:To further elucidate the relationship between the growth stress and cracking of KDP (KH2PO4, potassium dihydrogen phosphate) crystals of different sizes, a three-dimensional finite element calculation was conducted to analyze the growth stress of KDP single crystals grown from Z-plate seeds with varying cooling rates. The mismatch in the coefficient of thermal expansion (CTE), between the cap region and its close vicinity, and among the transparent region, was taken into account. The results indicate that when the cap region is a solid region (when the seed was regenerated with a cooling rate of 0.1 °C/day), the difference in material properties between the cap region and its close vicinity, especially the CTE mismatch along the a-axis, is the main reason of the high stresses. When the cap region is a box-like structure filled with solution (when the seed was regenerated with a cooling rate of 0.3 °C/day), the calculated stress is in proportion to the CTE gradient of the transparent region. Under both models, the stresses induced from an incremental CTE value (from the cap region to the growth front) are greater than those calculated from a diminishing CTE value, implying that the impurities reduce the CTE of KDP crystals, causing the crystals to crack more easily. Despite the maximum stresses inside the crystals changing slightly with an increase in crystal size, the decreased fracture stress of large brittle crystals leads to a higher cracking risk in a large-sized crystal.

Microhardness Measurement of KDP Crystal Grown by Point-Seed Technique

Stress Analysis of KDP Single Crystals Caused by Thermal Expansion Mismatch during Traditional Growth

Mechanical Response of KDP Single Crystal Using Nanoindentation Technique

Nanoindentation Size Effect of KDP Crystal by Instrumented Indentation Testing

Elastic-Plastic Deformation of KDP Crystals under Nanoindentation

Mechanical properties of potassium dihydrogen phosphate single crystal by the nanoindentation technique

Experimental Research on Micro Scale Mechanics Behavior of Potassium Dihydrogen Phosphate Crystal

Investigation and Analysis of Pin-Point Damage and Damage Growth Characteristics in KDP and DKDP Crystals.

Nanoindentation on the Doubler Plane of KDP Single Crystal

Nano-Indentation Study on the (001) Face of Kdp Crystal Based on Sph Method

Near-surface Mechanical Properties of KDP Crystals in Single Point Diamond Turning

Elastic-plastic-brittle transitions of potassium dihydrogen phosphate crystals: characterization by nanoindentation

The Strain Rate Sensitivity and Creep Behavior for the Tripler Plane of Potassium Dihydrogen Phosphate Crystal by Nanoindentation

Material Removal Characteristics of KDP Crystal in Ultrasonic Vibration-Assisted Scratch Process

Surface Damage Analyse of KDP Crystal Grinding

Experimental Investigation on Diamond Drilling of Potassium Di-Hydrogen Phosphate (kdp) Crystal

Characterization of KDP Crystal Surfaces from Single Point Diamond Milling

Subsurface Damage in Scratch Testing of Potassium Dihydrogen Phosphate Crystal

Material removal mechanisms and characteristics of potassium dihydrogen phosphate crystals under nanoscratching

Analysis on Mechanical Property of Anisotropy of KDP Crystal

Evolution of Laser-Induced Bulk Damage in KDP Crystal