PROTOTYPE GRFP-WOOD RAILROAD CROSSTIE: EXPERIMENTAL TESTING AND FINITE ELEMENT MODELING

Julio F. Davalos,Michael G. Zipfel,Pizhong Qiao
1998-01-01
Abstract:A need currently exists to develop innovative means for improving the performance and service-life of wood ties. In this paper, the experimental testing and finite element modeling of prototype wood and gfrp-wood railroad crossties are presented. Using glass fibers, epoxy resin and a resorcinol formaldehyde primer, wood cores are reinforced with a relatively thin layer of composite by the filament winding process. A 3-D finite element (FE) model of a beam is used to predict the response of the prototype crosstie samples. To verify the predictions of the FE model, both wood and GFRP-wood samples are tested under combined static and moisture loading. The predicted linear response of the samples correlates well with experimental results. The experimental results indicate that significant increases in stiffness (about 21% for dry and 25% for wet conditions) and strength (about 28% for dry and 70% for wet conditions) are achieved by wrappipng wood cores with a relatively thin (0.07 in) layer of composite. Based on the FE model of the prototype samples, a full-size crosstie is modeled as a beam on elastic foundation, and the GFRP reinforcement is optimized using an innovative optimization technique. The combined numerical modeling and experimental evaluation study presented in this paper is used to provide design recommendations for the future development of full-size GFRP-wood crossties.
What problem does this paper attempt to address?