Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Design Capacity Determination Method from Specimen Testing Based on Design Reliability Analysis

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

ULTIMATE LOAD-CAPACITY ANALYSIS OF LIGHT-WEIGHT STEEL PORTAL FRAMES UNDER WIND AND SNOW LOADING

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

COMPARISON OF EFFECTIVE LENGTH COEFFICIENT OF CONSTANT-SECTION STEEL FRAME-COLUMN BETWEEN CHINESE AND AMERICAN DESIGN SPECIFICATIONS

Reliability-based design on centrifuge concrete filled steel tubular members

Improved bridge capacity rating methods based on system reliability assessment

Design of foundation structures of sea-crossing bridges on serviceability limit state

Reliability Analysis of Foundation Structures of Offshore Long-span-bridges on Serviceability Limit States

Influence of load partial factors adjustment on reliability design of RC frame structures in China

Calculation and Reliability Analysis of the Shear Capacity of Steel Reinforced Concrete Beams

Comparative Study On Design Methods For Steel Structural Members Strengthened By Increasing The Section Area While Under Load In Different Codes

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners

Calculation of bearing capacity of concrete filled steel rectangular hollow sectional compression-bending members under cyclic loading

DESIGN METHOD OF TECHNICAL SPECIFICATION FOR CONCRETE-FILLED STEEL TUBULAR(DBJ 13-51-2003) AND RELIABILITY ANALYSIS

Comparative Study on the Calculation Theory for the Flexural Capacity of Steel Reinforced Concrete Beams

Study on Safety Degree for Existing RC Structural Elements Based on Calculated Reliability

Comparison Study Of Design Strength In Steel Design Codes Of Different Countries

DIRECT STRENGTH METHOD OF WELDED BOX-SECTION FOR PREDICTING ULTIMATE LOAD-CARRYING CAPACITY