Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Study on Safety Degree for Existing RC Structural Elements Based on Calculated Reliability

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Shear Assessment of a Reinforced Concrete Bridge Deck Slab According to Level‐of‐approximation Approach

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

A study on the probabilistic safety assessment of the truss structure designed by the LRFD code

Life-cycle Reliability of Engineering Structures and Structure Safety under Hazard Events

Design of foundation structures of sea-crossing bridges on serviceability limit state

Influence of load partial factors adjustment on reliability design of RC frame structures in China

Simplified Method for Time-Dependent Reliability Analysis of Aging Bridges Subjected to Nonstationary Loads

Structural Reliability Analysis and Reliability Index Calculation Method Based on Measurement Uncertainty

Life-cycle multi-attribute decision making of RC structures considering sustainability

Rating Method by Weight Function for the Degree of Reliability of Existing Buildings

Development of the Calculation Methods of Structural Reliability and its Relevant Problems

A NEW METHOD FOR EFFICIENT SOLUTION OF STRUCTURAL SYSTEM RELIABILITY

Study on Safety Level of RC Beam Bridges under Earthquake

Reliability Analysis of Foundation Structures of Offshore Long-span-bridges on Serviceability Limit States

Structural reliability software and calculation tools: a review

Research on Bearing Capacity Design Reliability of RC Crane Beams

Reliability estimation of corroded RC structures based on spatial variability using experimental evidence, probabilistic analysis and finite element method