Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Simplified Method for Time-Dependent Reliability Analysis of Aging Bridges Subjected to Nonstationary Loads

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

A Realistic Resistance Deterioration Model for Time-Dependent Reliability Analysis of Aging Bridges

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

Time-dependent Reliability Assessment of Aging Series Systems Subjected to Non-Stationary Loads

Updating the Assessment of Resistance and Reliability of Existing Aging Bridges with Prior Service Loads

Time-Dependent Reliability of Aging Structures in the Presence of Non-Stationary Loads and Degradation

Time-Dependent Reliability Analysis of RC Bridges Considering Shrinkage, Creep, Resistance Degradation, and Vehicle Load Flows

RISK-RANKING DECISION OF REPAIR AND STRENGTHENING OF EXISTING BRIDGES BASED ON TIME-DEPENDENT RELIABILITY AND ECONOMICAL OPTIMIZATION

An Improved Time-dependent Reliability Model for Aging RC Bridges Based on GPD Load Distribution

Improved bridge capacity rating methods based on system reliability assessment

Time-dependent Reliability of Ageing Structures: an Approximate Approach

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Bayesian updating the resistance estimate of existing aging bridges with prior service load history

Estimating the Time-Dependent Reliability of Aging Structures in the Presence of Incomplete Deterioration Information

The Model for Predicting the Remaining Service Life of Reinforced Concrete Bridges In-Service and Applicability

Time-dependent Reliability Analysis of Existing Bridges under Atmospheric Environment

Bridge Rating Using System Reliability Assessment. II: Improvements to Bridge Rating Practices

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Reliability-based life-cycle maintenance analysis of RC pile caps considering multiple deterioration modes and social cost