Abstract:ABSTRACTCompared with poly(butylene terephthalate)/glycidyl methacrylate grafted poly(ethylene–octene) (PBT/POE‐g‐GMA) binary blends, supertough PBT‐based ternary blends with little rigidity loss were successfully obtained by adding rigid polypropylene (PP) into PBT/POE‐g‐GMA blends to construct core–shell particles during melt blending. The effects of PP content and type on the phase morphology and mechanical properties of the blends were systematically investigated. Theoretical predictions and scanning electron microscopy observation showed that a core–shell structure was formed in PBT matrix with PP as the core and POE‐g‐GMA as the shell. The mechanical property tests showed that POE‐g‐GMA and PP had significant synergistic toughening effect. When PP with high melt flow index (H‐PP) was used, PBT/POE‐g‐GMA/H‐PP (70/15/15) blends possessed the highest Izod notched impact strength, which was 1.9‐fold compared with PBT/POE‐g‐GMA (70/30) binary blends, while the tensile performance loss was little. The essential work of fracture tests was performed to evaluate the fracture resistance of different samples. The results demonstrated that PBT/POE‐g‐GMA/PP ternary blends possessed much better resistance to crack propagation than PBT/POE‐g‐GMA binary blends. The decrease of interparticle distance and the fibrillation of core–shell particles activated intense matrix shear yielding, which was the reason for the high crack resistance of ternary blends. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48872.

Plastic Deformation and Damage Mechanisms of Ternary PP/PA6/POE Polymer Blends

Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension

Comparison Among Three Different Approaches to Dynamic Damage Measurement for Polymer Blends

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Polypropylene/Polyamide 6/Polyethylene-Octene Elastomer Blends. Part 3. Mechanisms of Volume Dilatation During Plastic Deformation under Uniaxial Tension

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Morphology and Deformation Mechanisms of Polystyrene Low-Density Polyethylene Blends Studied by Tem

Dynamic Fracture Behaviors Of Polypropylene/Polyamide-6 Blends

Polypropylene/polyamide 6/polyethylene–octene Elastomer Blends. Part 2: Volume Dilatation During Plastic Deformation under Uniaxial Tension

The Influence of Pressure-Induced-Flow Processing on the Morphology, Thermal and Mechanical Properties of Polypropylene Blends

Dynamic Fracture Properties of PP/PA6/POE-g-MA Studied by Caustics Method

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends

Mechanism and properties of Super-Toughened ternary blends with unique 'Tassel-Bundle' morphology

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states

Interlaminar Stress and Damage Mechanism of Thermoplastic Composite Laminates