Abstract:<p>Structural damage identification approaches relying on structural vibration shapes (VSs) have been widely developed. Among the approaches, the pseudo-force approach has attracted increasing attention during the recent decade owing to the fact that the damage-induced pseudo-force is concentrated within the damage region only and rapidly attenuates at undamaged locations. Transverse pseudo-forces (TPFs) relying on flexural VSs have been used for structural damage identification. However, the TPF approach is inapplicable to some structures governed mainly by tension and not bending, such as cables in a cable-stayed bridge, because bending effects on their flexural vibrations are much smaller compared to their tension effects. In contrast, longitudinal VSs can be useful for identifying such damages, although they are much more difficult to measure than flexural VSs. In this study, a new concept of axial pseudo-force (APF) is formulated using damage-induced perturbation in longitudinal vibration, which forms the basis of a novel damage identification approach for longitudinally vibrating structures. Unlike the TPF approach relying on transverse bending, the proposed APF approach relies on axial tension/compression. In particular, a damage index (DI) is established to indicate and locate structural damage. The multiscale analysis is integrated into the DI to enhance its robustness against environmental noise interference. A normalization strategy is further proposed to deal with unknown material and structural parameters in practical scenarios. The capability of the approach in identifying damage in longitudinally vibrating structures is analytically verified on bars with two-sided notches. The applicability of the approach is experimentally validated by identifying a two-sided notch in an aluminum bar whose longitudinal VSs were acquired through non-contact vibration measurement using a three-dimensional (3D) scanning laser vibrometer (SLV).</p>

A Vibration-Based Damage Identification Technique Free of Structural Baseline Information : Experimental Validation in Multi-Component Plane Structure

A Dynamic Equilibrium–Based Damage Identification Method Free of Structural Baseline Parameters: Experimental Validation in a Two-Dimensional Plane Structure

Identification of Structural Damage Based on A "weak" Formulation of Locally Perturbed Structural Vibration

On a hybrid use of structural vibration signatures for damage identification: a virtual vibration deflection (VVD) method

Identification of structural damage based on locally perturbed dynamic equilibrium with an application to beam component

Development in Vibration-Based Structural Damage Detection Technique

Structural Damage Detection Based on Virtual Element Boundary Measurement

Vibration-Based Non Destructive Structural Damage Detection

Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures

Dynamic Perturbation Characteristics for Non-Baseline Structural Damage Diagnosis

Identification of Incipient Damage Using High-Frequency Vibrational Responses

Dynamic Characteristics And Vibration-Based Damage Inspection Of Structures With Actual Fatigue Cracks

A novel structural damage identification approach using damage-induced perturbation in longitudinal vibration

Structural Damage Detections Based on a General Vibration Model Identification Approach

Research Strategy and Application of Vibration-Based Non Destructive Structural Damage Detection

Vibration-Based Damage Detection with Structural Modal Characteristics

Vibration-based Construction and Extraction of Structural Damage Feature Index

Visualization of Structural Damage Detection Using Vibration-Based Identification Techniques

A “Pseudo-excitation” approach for structural damage identification: From “Strong” to “Weak” modality

Structural Damage Identification Based On The Anti-Resonant Frequency And Least Square Algorithm

Statistical enhancement of a dynamic equilibrium-based damage identification strategy: Theory and experimental validation