Abstract:The motivation behind this paper is to develop a spectral-based damage detection and damage localization scheme using in-service ambient vibration in the context of non-model-based damage characterization. In this regard, a response parameter known as spectral moment is implemented for structural damage identification. The damage identification procedure starts with developing response power spectral density (PSD). The principal structural response features are then extracted from the frequency distribution of the spectrum using spectral moments. It is demonstrated that, although, spectral moment is a nonmodal characteristic of a process, it is related to modal parameters of a response signal since the spectral moment at each location is proportional to its corresponding modal vector. Hence, it is expected that due to damage occurrence spectral moment undergoes a variation. On this point, a damage sensitive feature is defined by comparing the spectral moments of two successive states of the structure. It is demonstrated that at a damage location there is a pronounced distinctive change in the indicative feature which is implemented for damage localization. The major advantages of the method include, first, the method works based on output-only measurement data, and second, it does not require any representative model of the structure and finally, unlike modal data that provides information at specific frequencies, the presented method is a broadband approach using information in a wide frequency range. The effectiveness and robustness of the proposed technique was validated by numerical simulations and an experimental case study. A series of numerical simulations with different damage scenarios was carried out on an Euler-Bernoulli beam subject to a band-limited random Gaussian excitation. Damage was simulated by reducing the flexural rigidity of elements at particular locations in single or multiple states. An experimental case study was also investigated utilizing a reinforced concrete jack arch which is one of the major structural components of the Sydney Harbor Bridge. Damage was introduced by creating a crack via applying gradual load using load cell. The numerical and experimental analyses indicated a promising sensitivity of the approach to detect and localize structural damage.

Experimental Study of Structural Damage Based on Bispectral Analysis and Singular Value Decomposition

Structural damage identification based on singular value decomposition of third-order cumulants

Singular Spectrum Analysis Based Structural Damage Detection from Nonlinear Vibration Measurements Containing Noise

Structure Damage Diagnosis Based on Analyzing Changes of Vibration Mode

Dynamic damage identification for beam structures based on transfer entropy

Singular Spectrum Analysis for Enhancing the Sensitivity in Structural Damage Detection

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

On a hybrid use of structural vibration signatures for damage identification: a virtual vibration deflection (VVD) method

Experimental Study on Structural Damage Alarming Method Based on Wavelet Packet Energy Spectrum

Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack

Structural Damage Identification Based On The Anti-Resonant Frequency And Least Square Algorithm

STRUCTURAL DAMAGE EARLY WARNING BASED ON VIBRATION TESTING AND WAVELET PACKET ANALYSIS

Vibration-Based Damage Detection with Structural Modal Characteristics

Study on Structural Damage Identification Using Acceleration Data in Time Domain

Fusion of Structural Damage Identification Results from Different Test Scenarios and Evaluation Indices in Structural Health Monitoring

A novel structural damage identification approach using damage-induced perturbation in longitudinal vibration

Experimental Investigation On Structural Damage Detection Scheme Based On Distributed Fiber Optic Sensors

Research of Structural Damage Detecting Parameters Based on Experimental Mode Shapes

Spectral-Based Damage Identification in Structures under Ambient Vibration.

Dynamic Perturbation Characteristics for Non-Baseline Structural Damage Diagnosis

Study on Damage Identification of High-Rise Buildings