Numerical simulation analysis of high-temperature bent sodium heat pipes
Xiongwei Cheng,Hualei Jiang,Taosheng Li,Siwei Zhang,Chengjun Duan,Huaping Mei
DOI: https://doi.org/10.1515/kern-2023-0121
IF: 0.321
2024-03-27
Kerntechnik
Abstract:High-temperature bent heat pipes are safety-level heat transfer components used in heat pipe cooled reactor, and their applications are becoming increasingly widespread. In this study, a comprehensive three-dimensional numerical model was established to evaluate the effects of different bending angles and radii on the performance of high-temperature heat pipes. The model solved for the temperature, pressure, and velocity fields in the wall, wick, and evaporator, considers the compressibility effect of the vapor. The study investigated parameters such as vapor pressure, vapor velocity, radial secondary flow field, wall temperature, wick temperature, and equivalent thermal resistance of powder sintered core sodium heat pipes with bending angles of 45°, 90°, 135°, 180°, and a bending radius under 90°. The results showed that when sodium vapor enters the bent pipe, the vapor flow deviates towards the outer side, resulting in higher vapor pressure at the outer side than the vapor pressure at the inner side, and the generation of radial secondary vortex. This leads to higher temperature in the evaporator and adiabatic sections of the bent heat pipe, while lower temperature in the condenser. Fractal patterns are observed in the outer and inner wall temperature curve in the adiabatic section, with lower temperatures on the inner side and higher temperatures on the outer side. The bent heat pipe exhibits higher equivalent thermal resistance than that of a straight heat pipe, and the equivalent thermal resistance increases with increasing bending angle, and the equivalent thermal resistance decreases with increasing bending radius.
nuclear science & technology