Abstract:Superconducting cavity is the key equipment of the superconducting accelerator, which provides higher acceleration voltage and higher frequency power per unit length, and saves equipment space. Superconducting cavities need to be gradually cooled from ambient temperature (300 K) to the superconducting temperature (4.2 K or below) during the test and operation. The temperature difference on the cavity must be strictly limited during the cooldown process to prevent excessive thermal stress on the surface of the superconducting cavity. Since this cooldown process for the superconducting cavity is a typical large hysteresis, non-linear process that is difficult to control automatically using decoupled proportion integral derivative (PID) methods directly, a less efficient manual control scheme is normally adopted. In this paper, 3D numerical simulation, 1D pipe and 0D tank model with artificial neural network (ANN) were combined to generate a two-layer surrogate model that can balance computational accuracy and speed, to improve the automation and cooling efficiency of the superconducting cavity cooldown process. In order to achieve automatic control of the cooling procedure for the superconducting cavity, a model predictive control (MPC) approach was also built on the basis of this two-layer surrogate model. According to the results of the experiment test, the improved method could realize a quick and smooth cooldown process of the superconducting cavity, during which the temperature difference on the cavity could satisfy the requirements. Additionally, the improved automatic cooldown method was more adaptable and saved 29 % more time than the original manual control method. The foundation for a more intelligent automated control of future large cryogenic systems or other system with the large hysteresis, non-linear properties, was laid.

Application of Weighting Multiple Models Optimal Controller in Medium Plate Cooling Process

Application of Multiple Models BP NN Weighting Optimal Controller in Medium Plate Cooling Process

A Pragmatic Approach For Selecting Weight Matrix Coefficients In Model Predictive Control Algorithm And Its Application

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

The Study of Controlled Cooling Technology and Warping of X65 Heavy Pipeline Plate

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Study on Modeling and Intelligent Control of Wort Evaporating Process

Modeling Of Two-Dimensional Dynamic Temperature Distribution Of A Lpcvd Process And Control Design By Mpc

Horizon-Varying Model Predictive Control for Accelerated and Controlled Cooling Process

Model-predictive-control for an Accelerated Cooling Process

Time-Space Transform Based Model Predictive Control For Accelerated And Controlled Cooling Process

Adaptive neural network controller for the molten steel level control of strip casting processes

Distributed model predictive control for plant-wide hot-rolled strip laminar cooling process

Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

An approach to model building for accelerated cooling process using instance-based learning

A New Fuzzy-weighted Control Used Multiple PID Controller Based on Prediction Model

A Multi-Objective Model Predictive Control for Temperature Control in Extrusion Processes

Optimization Target Resetting Distributed Model Predictive Control for Accelerated Cooling Process

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Automation of superconducting cavity cooldown process using two-layer surrogate model and model predictive control method

Numerical and experimental study of feedforward and feedback control for microchannel cooling system