Abstract:Liquid resin infusion (LRI) processes are promising manufacturing routes to produce large, thick, or complex structural parts. They are based on the resin flow induced, across its thickness, by a pressure applied onto a preform/resin stacking. However, both thickness and fiber volume fraction of the final piece are not well controlled since they result from complex mechanisms which drive the transient mechanical equilibrium leading to the final geometrical configuration. In order to optimize both design and manufacturing parameters, but also to monitor the LRI process, an isothermal numerical model has been developed which describes the mechanical interaction between the deformations of the porous medium and the resin flow during infusion.1, 2 With this numerical model, it is possible to investigate the LRI process of classical industrial part shapes. To validate the numerical model, first in 2D, and to improve the knowledge of the LRI process, this study details a comparison between numerical simulations and an experimental study of a plate infusion test carried out by LRI process under industrial conditions. From the numerical prediction, the filling time, the resin mass and the thickness of the preform can be determined. On another hand, the resin flow and the preform response can be monitored by experimental methods during the filling stage. One key issue of this research study is to highlight the changes in major process parameters during the resin infusion stage, such as the temperature of the preform and resin, and the variations of both thickness and fiber volume fraction of the preform. Moreover, this numerical/experimental approach is the best way to improve our knowledge on the resin infusion processes, and finally, to develop simulation tools for the design of advanced composite parts.

Experimental Study on Permeability of L-type Preform for Vacuum Infusion Process

Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process

An Enhanced Vacuum-Assisted Resin Transfer Molding Process and Its Pressure Effect on Resin Infusion Behavior and Composite Material Performance

Numerical Study of Thin-Walled Polymer Composite Part Quality When Manufactured Using Vacuum Infusion with Various External Pressure Controls

Study on Void Formation in Multi-Layer Woven Fabrics

Mechanical properties of innovative sandwich composites fabricated by vacuum infusion molding process

On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding

Evaluation of the vacuum infusion process objectives at the early stages of computer simulation

An experimental study on filling of gaps and void pockets during vacuum-bag-only consolidation of fiber placed preforms

Numerical and experimental analyses of resin infusion manufacturing processes of composite materials

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

MECHANICAL PROPERTIES AND MANUFACTURING PROCESS OF LATTICE REINFORCED SANDWICH COMPOSITES

Investigation of Transport Property of Fibrous Media: 3D Virtual Modeling and Permeability Calculation

Resin percolation and intimate contact in fast processing of thermoplastic composites

Void Prediction During Liquid Composite Molding Processes: Wetting and Capillary Phenomena

Model Prediction and Experimental Validation of Transverse Permeability of Large-Tow Carbon Fiber Composites

Effect of wettability on the void formation during liquid infusion into fibers

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Numerical and experimental investigations on the effects of variable cavity pressure on the formability of GLARE using hydromechanical deep drawing

Vacuum Chamber Infusion for Fiber-Reinforced Composites

Study on Porosity and Material Parameters of Hot Moulded Resin Matrix Composites using Nondestructive Laser Ultrasound Technique