Abstract:Pressure-swing distillation (PSD) is an alternative configuration used to separate pressure-sensitive azeotropes and avoid product contamination(s) in extractive or heterogeneous azeotropic distillation via the entrainer(s). Full heat integration between high- and low-pressure columns (HPC and LPC) can provide significant energy savings compared to the conventional case, while it also loses the control degree of freedom, trim condenser or reboiler heat load, via the integrated condenser/reboiler exchanger. Typically, the pressure of HPC is left uncontrolled, and additional pressure-compensated control strategies are implemented, which may create safety issues. To address this, the study proposes adding an auxiliary cooling-water-driven condenser to the fully heat-integrated PSD system, providing an extra manipulated variable to regulate the pressure of HPC. Compared to the conventional PSD system, the new modified process could achieve a 26.31% reduction in total annual cost. The research uses the maximum-boiling azeotropic mixture of acetone/chloroform as a case study which makes the distillation system characterized by high reflux ratios and a large recycle flow rate, leading to the unwelcome snowball effect. To achieve effective process control, robust control structures are proposed that rigorously regulate the pressure of the column by manipulating the heat removal in the trim condenser, attenuating or eliminating potential overpressure issues. Product purity and other evaluation indicators, such as product transient deviations, offsets, integral absolute error, and oscillation degrees, are also considered. Results show that the proposed control schemes can efficiently control the pressure of HPC, weaken the snowball effect, and maintain product purity. This study highlights the importance of pressure control for fully heat-integrated PSD systems, particularly for pressure-sensitive azeotropes with small pressure-induced shifts.

Design and Control of Ethyl Acetate–Ethanol Separation Via Pressure-Swing Distillation

Dynamic Simulation and Control schemes of hybrid membrane-distillation process on ethylene- ethane system

Process Design of Continuous-Flow Pervaporation Separation for Alcohol Dehydration

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Adding Rectifying/Stripping Section Type Heat Integration to A Pressure-Swing Distillation (psd) Process

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Heat integration and dynamic control of reactive pressure-swing distillation for separation of tetrahydrofuran/ethanol/water

Design and control of extractive distillation for the separation of methyl acetate-methanol-water

Control of side-stream pressure-swing distillation and extractive distillation for separating azeotropic mixture of cyclohexane and acetone

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

[Study on decoding of multiple pinhole coded aperture radioisotope tomographic images and image processing].

Control of fully heat-integrated pressure-swing distillation with strict pressure manipulation: A case study of separating a maximum-boiling azeotrope with small pressure-induced shift

Control of a Pressure-Swing Distillation Process for Benzene/isopropanol/water Separation with and Without Heat Integration

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Optimization and control of energy saving side-stream extractive distillation with heat integration for separating ethyl acetate-ethanol azeotrope

Pressure-driven batch distillation optimal control for acetone-methanol separation

Exploration of the Effects of Pressure on the Controllability of Extractive Distillation for Separating Pressure-Sensitive Azeotropes

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Process design and multi-objective optimization for separation of different feed composition of acetonitrile / ethanol / water with extractive distillation by varying pressure / pervaporation