Effect of Sand Coating on Durability and Micro-Structural Deterioration of GFRP Rebar under Alkaline Environment Attack

Yuan Yue,Wen-wei Wang,Lei Zhang,Liang,Qiang Zhao

DOI: https://doi.org/10.1016/j.conbuildmat.2024.134900

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:The objective of this study is to investigate the consequences of the sand-coated layer on the durability of glass fiber reinforced polymer (GFRP) rebars under four alkali solution concentrations and three temperatures. A total of 464 GFRP rebars specimens were manufactured to undergo accelerated corrosion experiments and mechanical performance test. Among them, 438 specimens were used to test the residual tensile strength of GFRP rebars after 120 days of immersion; 26 specimens were applied for surface observation and microscopic testing to analyze the degradation and damage process of GFRP rebars. SEM and digital camera were used to examine the micro-structure of samples either with or without sand layer covering. The unidirectional tensile strength experiment was conducted to test the remaining tensile strength of GFRP rebars after corrosion. The experimental results indicate that sand coating provides better protection and restraint in GFRP rebar durability reduction, resulting in a lower rate of fiber loosening and resin cracking and flaking when exposed to a solution over a pH of 12.5. As the failure of GFRP rebars ranges from local damage to cracking of the peripheral sand protective layer, the pH value of 12.5 is considered a critical alkali solution concentration. Based on experimental results, an improved model was proposed to predict the short-term and long-term residual strength values of GFRP rebars. The calculation results indicate that the predict values are in good agreement with the experimental ones, and the proposed model can be used to predict the residual strength of GFRP rebars.