Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

Design and Analysis of Cryogenic System for the Rotor of a 15 Mvar HTS Synchronous Condenser

Remote cryogenic helium gas circulating cooling system for a 10-Mvar class HTS dynamic synchronous condenser

Design and Experimental Investigations on the Helium Circulating Cooling System Operating at Around 20 K for a 300-kvar Class HTS Dynamic Synchronous Condenser

Design of Cryogenic Cooling System of a 35-Kv/3.5-mva Single-Phase HTS-Controllable Reactor

Liquid Hydrogen Cooling System for 100 kW-Class HTS Rotor thermal Design

General Design of a 300-Kvar HTS Synchronous Condenser Prototype

Design of the Cryogenic System for a 400 Kw Experimental HTS Synchronous Motor

Conceptual Design of the Cryogenic System for A 12 Mw Superconducting Wind Turbine Generator

Sub-Cooled Liquid Nitrogen Test System for Cooling HTS Synchronous Motor

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype

Thermal Analysis and Design of the Cryogenic System for 12 Mw Offshore Superconducting Wind Turbine

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Electromagnetic and Thermal Design of A Conduction-Cooling 150 Kj/100 Kw Hybrid Smes System

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Analysis and Calculation of AC Loss of HTS Coil in Superconducting Armature Electrical Machine

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

Stress Analysis and Bobbin Structure Optimization Design of a 35kv HTS-controllable Reactor

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Design of the Onboard Cryogenic System for High-Temperature Superconducting Maglev Vehicle

Cryogenic System for the Superconducting Tokamak Ht-7u

Thermal Loss Analysis, Design, and Test of a Novel HTS Magnet System for the Double-Stator Field-Modulation HTS Electrical Machine