Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

Liquid Hydrogen Cooling System for 100 kW-Class HTS Rotor thermal Design

Design and Analysis of Cryogenic Cooling System for Electric Propulsion System Using Liquid Hydrogen

Design and Analysis of Cryogenic System for the Rotor of a 15 Mvar HTS Synchronous Condenser

Sub-Cooled Liquid Nitrogen Test System for Cooling HTS Synchronous Motor

Design of the Cryogenic System for a 400 Kw Experimental HTS Synchronous Motor

A Design Study on 20 kW Class Axial Flux Motor with HTS Field Winding for 100 MPa Liquid Hydrogen Pump

Design of Cryogenic Cooling System of a 35-Kv/3.5-mva Single-Phase HTS-Controllable Reactor

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Remote cryogenic helium gas circulating cooling system for a 10-Mvar class HTS dynamic synchronous condenser

Temperature Distribution in the Field Coil of a 500-kW HTS AC Homopolar Motor

Preliminary Design Study on Non-Twisted HTS Conductor for Fusion Applications

Design of Axial and Radial Flux HTS Permanent Magnet Synchronous Motor's Rotor

Design and Experimental Investigations on the Helium Circulating Cooling System Operating at Around 20 K for a 300-kvar Class HTS Dynamic Synchronous Condenser

Conduction-Coolled HTS Magnets Closed-Loop System Excited by a Rotating Magnets Flux Pump

Rotor Design of HTS Homopolar Inductor Alternator Based on Multi-Physics Field

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Cryogenic System for the Superconducting Tokamak Ht-7u

Design of a 30-K/4-kj HTS Magnet Cryocooled with Solid Nitrogen

Thermal Loss Analysis, Design, and Test of a Novel HTS Magnet System for the Double-Stator Field-Modulation HTS Electrical Machine

Conceptual Design of the Cryogenic System for A 12 Mw Superconducting Wind Turbine Generator

General Design of a 300-Kvar HTS Synchronous Condenser Prototype