Abstract:In rotating machines, the approach of applying nonlinear conductive stress grading tape (SGT) has been applied to reduce the electric field stress in the coil's overhang region. To characterize and verify the electric field grading effect of SGT in electric machines, electric field analysis using the nonlinear conductivity of SGT as a boundary condition must be considered. However, previous studies have shown limitations in the characterization and application of SGT materials in insulation system design for various reasons, such as lack of conductivity measurement standards for nonlinear materials or not considering possible changes in material properties during the manufacturing procedure. In this study, the nonlinear conductivity of SGT was measured by considering the rotating machine's manufacturing procedure. A finite element method (FEM) electric field analysis was performed using the measured nonlinear conductivity. Based on the improved conductivity measurement method of SGT and FEM analysis, the effects of changing several insulation design parameters in the field grading performance were studied on a 13.8 kV stator coil. Moreover, the effect of preheating on the SGT conductivity was also examined. Based on analysis results, we realized the possibility of more precise insulation design of the stator coil. Our findings supplement the insufficient insulation design guide on the SGT part and contribute to establishing a systematic approach for insulation design. Furthermore, the proposed methods enable design optimization and detection of the cause of insulation failure.

Design of a Smart Insulation Method for High-Temperature Superconducting Rotating Machines

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of a Conduction-Cooled HTS SMES

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Design And Analysis Of A Switched Reluctance Motor With High Temperature Superconducting Windings

Design and Analysis of a Switched Reluctance Motor with Superconducting Windings and Tapering Poles

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Design of the HTS Permanent Magnet Motor with Superconducting Armature Winding

Design and Optimization of High‐Temperature Superconducting Racetrack Magnet for the Rotor of a 100‐kw Generator

Temperature Distribution in the Field Coil of a 500-kW HTS AC Homopolar Motor

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

AC Loss Analysis and Modular Cryostat Design of a 10-MW High-Temperature Superconducting Double Stator Flux Modulation Machine

A Design Study on 20 kW Class Axial Flux Motor with HTS Field Winding for 100 MPa Liquid Hydrogen Pump

Calculation, Design, and Winding Preliminary Tests of 90-kW HTS Machine for Small-Scale Demonstrator of Generating System for Future Aircraft With Hybrid Propulsion System

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

Control and Operation of A High Temperature Superconducting Synchronous Motor

Design and Test of a High-Speed Double-Winding High Temperature Superconducting Synchronous Motor

Stress Grading Performance Analysis of Stator Coil Considering the Manufacturing Method and the Insulation Design

Design And Fabrication Of A Conduction-Cooled High Temperature Superconducting Magnet For 10 Kj Superconducting Magnetic Energy Storage System