Abstract:Ultrahigh field systems ( ≥ 7 T) can increase the signal-to-noise ratio of magnetic resonance imaging (MRI), improving imaging performance compared to systems with lower fields. However, these enhancements heavily rely on a high B0 magnetic field homogeneity level, which can be achieved through superconducting shimming. This paper presents a novel two-stage superconducting shimming method designed to achieve precise shimming for a 7 T MRI superconducting magnet. In the initial stage, detailed measurements and fittings were conducted to determine the current polarity and the axial or circumferential positions of the shim fields. Subsequently, an optimization strategy was implemented to determine the optimal shim currents with a flexible target field. The second stage involves an iterative process to fine-tune the current of a specific shim coil, identified as having the most significant impact on field homogeneity. The overall fitness of 99.5% underscores the precision in determining the current polarity and position of the shim fields. Significantly, the calibrated shim system substantially improves the peak-to-peak and Root Mean Square Error (RMSE) field homogeneities from 107.42 ppm and 37.00 ppm to 11.12 ppm and 3.26 ppm, respectively, representing improvements of 89.65% and 91.19%. Furthermore, the simulation results of the fine-tuning stage demonstrate additional enhancements in peak-to-peak field homogeneity, to 9.9 ppm by reducing the current of the Z2 shim coil by 51.3 mA. Additionally, the shimmed magnetic field exhibited high time stability, with a maximum variation of only 27 μT observed within 48 h. Thus, the proposed two-stage superconducting shimming framework effectively addresses the challenge of imperfect B0 magnetic fields, enhancing peak-to-peak and RMSE field homogeneity. The stepwise optimized approach also mitigates deviations caused by shim-to-shim coupling, demonstrating its efficacy in achieving precise shimming in ultrahigh-field MRI systems.

Performance of Superconducting Magnetic Particle Imaging in Constructing Field Free Region

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

Passive Shimming of A Superconducting Magnet Using the L-1-Norm Regularized Least Square Algorithm

Development of High Magnetic Field Magnet Technologies for the Magnetic Resonance Medical Imaging

Sequential Scan-Based High-Resolution 3-D Open-Sided Magnetic Particle Imaging System

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

First Superferromagnetic Remanence Characterization and Scan Optimization for Super-Resolution Magnetic Particle Imaging

A Streamlined 3-D Magnetic Particle Imaging System With a Two-Stage Excitation Feed-Through Compensation Strategy

A Novel Field-Free Line Generator for Mechanically Scanned Magnetic Particle Imaging

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

MPI System with Bore Sizes of 75 mm and 100 mm Using Permanent Magnets and FMMD Technique

Thermal Analysis of Persistent Current Switch for Magnetic Resonance Imaging Superconducting Magnet

Superconducting Shim Coils Design for the 9.4 T Whole-Body MRI Magnet

Implementing a Two-Stage, Shim Field-Calibrated Superconducting Shimming Method on a 7t Cryogen-Free Small Animal MRI Magnet

Implementing a two-stage, shim field-calibrated superconducting shimming method on a 7 T cryogen-free small animal MRI magnet

Gradient-Based Pulsed Excitation and Relaxation Encoding in Magnetic Particle Imaging

Compact Magnetic Force Microscope (MFM) System in a 12 T Cryogen-Free Superconducting Magnet

Gradient Coil Design with Enhanced Shielding Constraint for a Cryogen-Free Superconducting MRI System

Theoretical Predictions for Spatially-Focused Heating of Magnetic Nanoparticles Guided by Magnetic Particle Imaging Field Gradients

Superconducting and low temperature RF Coils for Ultra-Low-Field MRI: A Study on SNR Performance

Review of the research status of practical superconducting materials and their current carrying performance