Abstract:Amorphous polymer-derived silicon oxycarbide (SiOC) is an attractive candidate for Li-ion battery anodes, as an alternative to graphite, which is limited to a theoretical capacity of 372 mAh/g. However, SiOC tends to exhibit poor transport properties and cycling performance as a result of sparsely distributed carbon clusters and inefficient active sites. To overcome these limitations, we designed and fabricated a layered graphene/SiOC heterostructure by solvent-assisted infiltration of a polymeric precursor into a modified three-dimensional (3D) graphene aerogel skeleton. The use of a high-melting-point solvent facilitated the precursor's freeze drying, which following pyrolysis yielded SiOC as a layer supported on the surface of nitrogen-doped reduced graphene oxide aerogels. The fabrication method employed here modifies the composition and microstructure of the SiOC phase. Among the studied materials, the highest levels of performance were obtained for a sample of moderate SiOC content, in which the graphene network constituted 19.8 wt % of the system. In these materials, a stable reversible charge capacity of 751 mAh/g was achieved at low charge rates. At high charge rates of 1480 mA/g, the capacity retention was ∼95% (352 mAh/g) after 1000 consecutive cycles. At all rates, Coulombic efficiencies >99% were maintained following the first cycle. Performance across all indicators was majorly improved in the graphene aerogel/SiOC nanocomposites, compared with unsupported SiOC. The performance was attributed to mechanisms across multiple length scales. The presence of oxygen-rich SiO4–xCx tetrahedral units and a continuous free-carbon network within the SiOC provides sites for reversible lithiation, while high ionic and electronic transport is provided by the layered graphene/SiOC heterostructure.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12376?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12376</a>.Further graphics relating to the macrostructure, microstructure, composition, and performance of materials fabricated in the present work, and tables providing a comprehensive comparison of the conductivity and cycling performance of anode materials studied here with related studies reported in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12376/suppl_file/am0c12376_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Effect of Graphitization Degree of Carbon and Si─O─C Network on the Electrochemical Performance of SiOC Anodes

Polymer-Derived SiOC Integrated with a Graphene Aerogel As a Highly Stable Li-Ion Battery Anode

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

SiOC Nanolayers Directly-Embedded in Graphite As Stable Anode for High-Rate Lithium Ion Batteries

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Synthesizing Si/SiOC composites through different sol-gel reaction routes for lithium-ion battery anode materials

Modulation of Free Carbon Structures in Polysiloxane-Derived Ceramics for Anode Materials in Lithium-Ion Batteries

Carbon-enriched SiOC ceramics with hierarchical porous structure as anodes for lithium storage

Excellent Cyclic and Rate Performances of SiO/C/Graphite Composites As Li-Ion Battery Anode.

Sulfur-doped silicon oxycarbide by facile pyrolysis process as an outstanding stable performance lithium-ion battery anode

Preparation of SiO/C anode materials for Li-ion batteries and its performance

Systematic electrochemical characterizations of Si and SiO anodes for high-capacity Li-Ion batteries

Electrochemical performance of a high-performance SiO composite anode material for Li-ion battery enhanced by piezoelectric effect

Highly Graphitized Carbon Coating on SiO with a π–π Stacking Precursor Polymer for High Performance Lithium-Ion Batteries

Insights into the SiO2 Stress Effect on the Electrochemical Performance of Si anode

Sequencing-Dependent Impact of Carbon Coating on Microstructure Evolution and Electrochemical Performance of Pre-lithiated SiO Anodes: Enhanced Efficiency and Stability via Pre-Coating Strategy

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

Influence of oxygen content on the electrochemical behavior of SiOx@C anodes for Li-ion battery

Scalable Synthesis of Carbon Stabilized Sio/Graphite Sheets Composite As Anode for High-Performance Li Ion Batteries

SiOC Phase Control and Carbon Nanoribbon Growth by Introducing Oxygen at Atom Level for Lithium‐Ion Batteries

Deciphering fast lithium storage kinetics via R-based self-derivation effects in siloxanes