Abstract:The industrial application of electrical discharge machining (EDM) for manufacturing injection molding, in many cases, requires forming depth cavities with high length-to-width ratios, which is quite challenging. During slot EDM with thin-walled electrodes, short-circuits and arcing discharges occur, as a result of low efficiency in removing debris and bubble gas from the gap. Furthermore, unstable discharges can cause increases in tool wear and shape deviation of the machined parts. In order to characterize the influence of the type of electrode material and EDM parameters on the deep slot machining of high-thermal-conductivity tool steel (HTCS), experimental studies were conducted. An analytical and experimental investigation is carried out on the influence of EDM parameters on discharge current and pulse-on-time on the tool wear (TW), surface roughness (Ra), slot width (S)-dimension of the cavity, and material removal rate (MRR). The analyses of the EDS spectrum of the electrode indicate the occurrence of the additional carbon layer on the electrode. Carbon deposition on the anode surface can provide an additional thermal barrier that reduces electrode wear in the case of the copper electrode but for graphite electrodes, uneven deposition of carbon on the electrode leads to unstable discharges and leads to increase tool wear. The response surface methodology (RSM) was used to build empirical models of the influence of the discharge current I and pulse-on-time ton on Ra, S, TW, and MRR. Analysis of variance (ANOVA) was used to establish the statistical significance parameters. The calculated contribution indicated that the discharge current had the most influence (over 70%) on the Ra, S, TW, and MRR, followed by the discharge time. Multicriteria optimization with Derringer's function was then used to minimize the surface roughness, slot width, and TW, while maximizing MRR. A validation test confirms that the maximal error between the predicted and obtained values did not exceed 7%.

Research on Mechanism and Experimental Effect of Tubular Electrode Dimensions on Electric Arc Electrochemical Composite Machining

Numerical Simulation and Experimental Study of Optimized Jet Shape in Electric Arc Electrochemical Composite Machining

A Sustainable Machining Method with High Efficiency, High Quality and Low Wear - Electric Arc Electrochemical Composite Machining

Surface Structure Evolution and Measurement Analysis of Ti6Al4V Titanium Alloy by Electric Arc Electrochemical Machining

Experimental Research on the Influence of Dielectrics on Short Electric Arc Machining of GH4169

Effect of atomization amounts on electrical discharge ablation machining and electrochemical machining

Research on Short Electric Arc–electrochemical Combined Machining Performance of Ti–6Al–4V Alloys Using Different Electrode Materials

Effects of non-electrical parameters on the characteristics of discharge craters and machining performance in short electrical arc milling

Influence of Different Tool Electrode Materials on Electrochemical Discharge Machining Performances

Study on Effects of Electrode Material and Dielectric Medium on Arc Plasma in Electrical Discharge Machining

Effects of Helical Tube Electrode Structure on Mixed Machining Product Transfer in Micro-Machining Channel during Tube Electrode High-Speed Electrochemical Discharge Machining

Experimental Research on Machining Performance of Electrode Materials in Dry Edm

Experimental Study in SEAM Machining Performance of W-Cu Alloy Electrode Materials

Investigation of Enhancing EDM Machining Performance of INCONEL Alloy Using Composite Electrodes

Single Pulse Studies of the Electrical Discharge Machining of Metal Matrix Composite Materials

Research on machining Technology of Electrospark-electrochemical Hybrid Energy Field with tungsten hole

Machining Surface Improvement through Electric- and Flow-Field Adjustments in Flying Electrochemical Milling of AA 2219

Precision Machining by Composite EDM and Ultrasonic Method Technique

Method for controlling the area of the electrolyte outlets in the flow field simulation and experimental verification of electrochemical machining

Study of the Effect of Electric Field Distribution to the Pulse Electrochemical Machining

Experimental Investigation and Optimization of Rough EDM of High-Thermal-Conductivity Tool Steel with a Thin-Walled Electrode