Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Electrostatic Self-Assembled Nickel Cobalt Sulfide/ti3c2 Mxene As a Bio-Capacitive Anode for Specific Attracting Sulfur-Cycling Bacteria and Regulating Extracellular Electron Transfer Efficiency

Electrostatic self-assembled nickel cobalt sulfide/Ti 3 C 2 Mxene as a bio-capacitive anode for specific attracting sulfur-cycling bacteria and regulating extracellular electron transfer efficiency

The Role of Binary Transition Metal Cobalt-Nickel Sulfide As an Anode Catalyst in Specifically Selection of Desulfuromonas and Improved Performance of Microbial Fuel Cell

Enrichment of Sulfur-Oxidizing Bacteria Using S-doped NiFe2O4 Nanosheets As the Anode in Microbial Fuel Cell Enhances Power Production and Sulfur Recovery

Carbon nanotubes encapsulating FeS2 micropolyhedrons as an anode electrocatalyst for improving the power generation of microbial fuel cells

Ti3C2 MXene as an excellent anode material for high performance microbial fuel cells

Stimulation of Electron Transfer in Electricigens by MnxCoySz Heterostructure for the Enhanced Power Generation of Microbial Fuel Cell

Enhanced Sulfide Removal and Bioelectricity Generation in Microbial Fuel Cells with Anodes Modified by Vertically Oriented Nanosheets.

MXene@Poly(diallyldimethylammonium Chloride) Decorated Carbon Cloth for Highly Electrochemically Active Biofilms in Microbial Fuel Cells

Bioelectrocatalytic reduction by integrating pyrite assisted manganese cobalt-doped carbon nanofiber anode and bacteria for sustainable antimony catalytic removal

MnO2@MXene/Carbon Cloth As an Anode for Microbial Fuel Cells

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Design of NiCo2S4@ZnAl-LDH/TiO2@MXene Synthesis As Promising Cathode Catalyst for Enhancing Electrochemical Performance in Microbial Fuel Cell

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) Bioanodes in Co-doped Modified Microbial Fuel Cell Promote Sulfamethoxine Degradation with High Enrichment of Electroactive Bacteria and Extracellular Electron Transfer

Hollow Cobalt Ferrite Nanofibers Integrating with Carbon Nanotubes As Microbial Fuel Cell Anode for Boosting Extracellular Electron Transfer

Modifying Ti3C2 MXene with NH4+ As an Excellent Anode Material for Improving the Performance of Microbial Fuel Cells.

A CoFe2O4/Nb2C-MXene-Modified Anode Improved the Performance Characteristics of a Microbial Fuel Cell in Terms of Bioelectricity Generation and Water Treatment

Nitrogen-doped Carbon Nanofibers Anchoring Fe Nanoparticles As Biocompatible Anode for Boosting Extracellular Electron Transfer in Microbial Fuel Cells