Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

MnO2@MXene/Carbon Cloth As an Anode for Microbial Fuel Cells

MXene@Poly(diallyldimethylammonium Chloride) Decorated Carbon Cloth for Highly Electrochemically Active Biofilms in Microbial Fuel Cells

Ti3C2 MXene as an excellent anode material for high performance microbial fuel cells

Polyaniline-MXene-coated carbon cloth as an anode for microbial fuel cells

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Enhanced extracellular electron transfer of CoMn2O4@CNT as microbial fuel cell anode

Fe/N Codoped Paper Carbon Fiber Foam Promoted Extracellular Electron Transfer for a High-Performance Microbial Fuel Cell

Stimulation of Electron Transfer in Electricigens by MnxCoySz Heterostructure for the Enhanced Power Generation of Microbial Fuel Cell

Electrostatic Self-Assembled Nickel Cobalt Sulfide/ti3c2 Mxene As a Bio-Capacitive Anode for Specific Attracting Sulfur-Cycling Bacteria and Regulating Extracellular Electron Transfer Efficiency

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

High-performance anode electrocatalyst of MnCo2S4–Co4S3/bamboo charcoal for stimulating power generation in microbial fuel cell

Electrostatic self-assembled nickel cobalt sulfide/Ti 3 C 2 Mxene as a bio-capacitive anode for specific attracting sulfur-cycling bacteria and regulating extracellular electron transfer efficiency

Modifying Ti3C2 MXene with NH4+ As an Excellent Anode Material for Improving the Performance of Microbial Fuel Cells.

Biomass-derived 3D hydrogel bioanode forincreasing electron transfer and chemical oxygen demand removal efficiency

A Carbon-Cloth Anode Electroplated with Iron Nanostructure for Microbial Fuel Cell Operated with Real Wastewater

Nano-structured Manganese Oxide As a Cathodic Catalyst for Enhanced Oxygen Reduction in a Microbial Fuel Cell Fed with a Synthetic Wastewater.

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

CNFs@MnO2 nanofiber as anode for improving extracellular electron transfer of microbial fuel cells

Enhanced Sulfide Removal and Bioelectricity Generation in Microbial Fuel Cells with Anodes Modified by Vertically Oriented Nanosheets.