Abstract:Thermal regulation and waste heat energy harvesting have been a concern in different industries, including the electronics sector that sees an increasing usage with technological advancement and automation. A form-stable phase change material (FSPCM) is an excellent solution to the problem, where device temperatures can be regulated without any PCM leakage. However, most FSPCMs are generally too stiff and bulky for coating onto delicate component parts, and their integration does not fit easily in a segment of a manufacturing line. Therefore, a UV-curable form-table polyethylene-glycol (PEG)-based PCM was investigated with trimethylolpropane ethoxylate triacrylate (TMPEOTA) as the UV matrix to present a fast-curing and coatable PCM for irregular surfaces. PEG composites of four different molecular weights, i.e., PEG 400, PEG 750, PEG 1050, and PEG 2050, were successfully fabricated with 50-80% PEG loading in TMPEOTA. UV curing was achieved instantaneously, and Fourier transform infrared (FTIR) spectrometry confirmed the success with the disappearance of the distinct C = C peak at 1620 cm(-1). All samples were found to be form-stable even at temperatures above their melting point, with matrix features present and no liquid observed by optical microscopy, suggesting a solid-solid phase transition. Differential scanning calorimetry (DSC) measured the phase change temperature to be tunable between 2 and 48 degrees C depending on the molecular weight of the PEG employed, and the enthalpy change of melting achieved a maximum of 117 J g(-1). Thermogravimetric analysis (TGA) also validated their thermal stability up to 150 degrees C. These UV-curable FSPCMs would be useful in providing a thermal regulatory coating or complex 3D-printed shapes.

Processable and Shape-Stable Phase Change Materials with Enhanced Thermal Conductivity of UV-cured NPGDMA Aided PEG2000 and BN

Fabricated Polyethylene glycol/ hydroxylated carbon nanotubes shape-stabilized phase change materials with improving thermal conductivity

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Polyethylene Glycol–Calcium Chloride Phase Change Materials with High Thermal Conductivity and Excellent Shape Stability by Introducing Three-Dimensional Carbon/Carbon Fiber Felt

A polyethylene glycol-based form-stable phase change material supported by nanoarray-modified metal foam

Dynamic ionic crosslinking, graft polyethylene glycol-based polymeric phase change materials networks with ultrahigh latent heat efficiency and recycling ability

Using mesoporous carbon to pack polyethylene glycol as a shape-stabilized phase change material with excellent energy storage capacity and thermal conductivity

Novel semi‐interpenetrating network structural phase change composites with high phase change enthalpy

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Preparation and characterization of polyethylene glycol‐based form‐stable phase change materials supported by poly (vinyl formal) foams

Rapid UV-Curable Form-Stable Polyethylene-Glycol-Based Phase Change Material

Thermal conductivity enhancement of polyethylene glycol/NF composite as stabilized phase change materials for thermal energy storage

MWCNTs/hydroxypropyl cellulose/polyethylene glycol-based shape-stabilized phase change materials

Improving the shape stability and photothermal conversion performance of phase change materials through three-dimensional metal-organic network

Recent Progress in PEG-Based Composite Phase Change Materials

The Shape-Stabilized Phase Change Materials Composed Of Polyethylene Glycol And Various Mesoporous Matrices (Ac, Sba-15 And Mcm-41)

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Using surface-modified UiO-66 with hierarchical pores to pack polyethylene glycol for phase change thermal energy storage: Experiment and molecular dynamics simulations

Reprocessable, biodegradable polyester-based solid-solid phase change materials networks from dynamic ionic crosslinking with high latent heat capability

Graphene Functionalization of Polyrotaxane‐Encapsulated PEG‐Based PCMs: Fabrication and Applications