Abstract:The development of phase change material (PCM) for battery thermal management poses key limitations on its reliability caused by leakage and shape deformation under high temperature. In this work, a kind of phase changeable and hydrophobic polymer skeleton is grown in situ in a paraffin (PA)/expanded graphite matrix to obtain the leakage-proof composite PCM (CPCM) at the kilogram-level. Benefiting from the additional latent heat provided by the phase changeable alkyl side chains of the polymer skeleton, the obtained CPCM shows a high latent heat of 120.3 J g–1 coupled with a thermal conductivity of 2.92 W m–1 K–1. Most importantly, the three-dimensional cross-linking main chain and the hydrophobic alkyl side chains endow the obtained CPCM with extraordinary shape stability under high temperatures up to 250 °C and high PA adsorbing capability, respectively. As a consequence, the CPCM presents excellent antileakage performance for the battery module (21 V/16 Ah) under harsh working conditions, i.e., 50 charge–discharge cycles at 3C–4C, thus giving rise to a durable cooling performance. The maximum temperature (Tmax) and temperature difference (ΔTmax) of the battery module can be controlled constant at 50.9 and 5.0 °C during the cycles, respectively. By stark contrast, owing to the obvious leakage phenomenon, the battery module with traditional CPCM adopting a classical low-density polyethylene skeleton shows increasing Tmax and ΔTmax during the cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00235?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00235</a>.Details of charge–discharge parameters; comparison of the latent heat; cyclic stability of the ΔHm, Tmax, and ΔTmax of the battery module upon cycling; preparation procedures of CPCM; schematic diagram of the battery module; DSC curves of OA, PA, LDPE, and CPCM; and current and voltage trace (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00235/suppl_file/ae1c00235_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Reprocessable, biodegradable polyester-based solid-solid phase change materials networks from dynamic ionic crosslinking with high latent heat capability

Thermally recyclable polyester-based phase change materials networks with high latent heat and network self-stability even at high temperature

Dynamic ionic crosslinking, graft polyethylene glycol-based polymeric phase change materials networks with ultrahigh latent heat efficiency and recycling ability

Processable and recyclable crosslinking solid-solid phase change materials based on dynamic disulfide covalent adaptable networks for thermal energy storage

Synthesis and Properties of Dynamic Crosslinking Polyurethane/PEG Shape-Stable Phase Change Materials Based on the Diels–Alder Reaction

Thermosetting semi-interpenetrating phase change materials with heat-triggered network self-dissociation

Thermal and Mechanical Robust Solid‐Solid Phase Change Materials Enabled by Reactive Crosslinkable Poly(Ethylene Glycol)s via Facile Thiol‐Ene Photo‐Click Chemistry

Novel semi‐interpenetrating network structural phase change composites with high phase change enthalpy

Aromatic Schiff Base-Based polymeric phase change materials for Safe, Leak-Free, and efficient thermal energy management

Series of solid-solid phase change materials with ultra-high thermal stability and controllable phase change temperature: kilogram-leveled preparation and application investigation

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

A polyethylene glycol-based form-stable phase change material supported by nanoarray-modified metal foam

Preparation of flexible solid-solid phase change materials with simultaneously thermal energy storage capability, reprocessability and dual-actuated shape memory performance

Recyclable Solid-Solid Phase Change Materials with Superior Latent Heat via Reversible Anhydride-Alcohol Crosslinking for Efficient Thermal Storage

Study on the Preparation and Properties of PEG Phase Change Materials Fixed by Semi-IPN

Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage

Ultrareliable Composite Phase Change Material for Battery Thermal Management Derived from a Rationally Designed Phase Changeable and Hydrophobic Polymer Skeleton

A polyurethane solid–solid phase change material for flexible use in thermal management

Flexible Phase Change Material Fiber: A Simple Route to Thermal Energy Control Textiles

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Integrating MXene Film With Recyclable Polyethylene Glycol‐co‐Polyphosphazene Copolymer as Solid–Solid Phase Change Material for Versatile Applications