Abstract:As a toxic pollutant, carbon monoxide (CO) usually causes harmful effects on human health. Therefore, the thermally catalytic oxidation of CO has received extensive attention in recent years. The CuO-based catalysts have been widely investigated due to their availability. In this study, a series of transition metal oxides (Fe2O3, Co3O4 and NiO) promoted CuO-based catalysts supported on the α-MnO2 nanowire catalysts were prepared by the deposition precipitation method for catalytic CO oxidation reactions. The effects of the loaded transition metal type, the loading amount, and the calcination temperature on the catalytic performances were systematically investigated. Further catalyst characterization showed that the CuO/α-MnO2 catalyst modified with 3 wt% Co3O4 and calcined at 400 °C performed the highest CO catalytic activity (T90 = 75 °C) among the investigated catalysts. It was supposed that the loading of the Co3O4 dopant not only increased the content of oxygen vacancies in the catalyst but also increased the specific surface area and pore volume of the CuO/α-MnO2 nanowire catalyst, which would further enhance the catalytic activity. The CuO/α-MnO2 catalyst modified with 3 wt% NiO and calcined at 400 °C exhibited the highest surface adsorbed oxygen content and the best normalized reaction rate, but the specific surface area limited its activity. Therefore, the appropriate loading of the Co3O4 modifier could greatly enhance the activity of CuO/α-MnO2. This research could provide a reference method for constructing efficient low-temperature CO oxidation catalysts.

Catalytic Oxidation of Carbon Monoxide over Copper Oxide with Interfering Gases Involved for Industrial Buildings: an Experimental and Theoretical Study

Effects of Interfering Gases on Catalytic Oxidation of Carbon Monoxide over Manganese Dioxide in Industrial Scenarios: A Systematic Study

Controlling carbon monoxide emissions from automobile vehicle exhaust using copper oxide catalysts in a catalytic converter

Dynamic Study of the Oxidation State of Copper in the Course of Carbon Monoxide Oxidation over Powdered CuO and Cu2O

Catalytic oxidation of CO over CuO@TiO2 catalyst: The relationship between activity and adsorption performance

CO2 Self-Poisoning and Its Mitigation in CuO Catalyzed CO Oxidation: Determining and Speeding up the Rate-Determining Step

Co3O4‐Based Catalysts for the Low‐Temperature Catalytic Oxidation of VOCs

CO Oxidation over Alumina-Supported Copper Catalysts

Mechanistic study of low-temperature CO oxidation over CuO/Cu2O interfaces with oxygen vacancy modification

Unveiling the Water-Resistant Mechanism of Cu(I)-O-Co Interfaces for Catalytic Oxidation

Photothermocatalytic Removal of CO and Formaldehyde with Excellent Water Vapor Stability over Dual‐Functional Copper Loading on TiO 2 Synthesized via Flame Spray Pyrolysis

Oxidation of carbon monoxide catalyzed by copper-zirconium composite oxides

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Theoretical Studies of CO Oxidation with Lattice Oxygen on Co3O4 Surfaces

A Review of Co3O4-based Catalysts for Formaldehyde Oxidation at Low Temperature: Effect Parameters and Reaction Mechanism

The Enhancement of CO Oxidation Performance and Stability in SO2 and H2S Environment on Pd-Au/FeOX/Al2O3 Catalysts

CO2 effect on catalytic abatement of VOC emissions over Cu-Co binary oxide films

Recent Advances of Cu-Based Catalysts for NO Reduction by CO under O2-Containing Conditions

Removal of CO in flue gas by catalytic oxidation: a review

Theoretical study on CO production mechanism from CO 2 reduction on Cu–catalyst surface with different oxidation states

CuO/TiO 2 /Ti Monolithic Catalysts for Low-Temperature CO Oxidation